Product Description
Factory offer greatest value new situation wood chipper manufactured in china
BX215,BX216,BX217,BX218,BX2113 Drum wood chipper are the primary products in our factory.they are experienced and ideal seller.it can make concluded wood chips twenty-30mm . This drum wooden chipper widely employed in the raw materials getting ready process in the factories of flakeboard, fiberboard, papermaking and wooden chips making plant. Little drum variety wooden chipper is the best equipment for factory’s laboratory preparing content.
Raw materials for Drum sort wooden chipper slicing is primarily modest trail wood, lumbering remainds ( such as branches, twigs, tress pallets etc) and woodworking remainds ( this sort of as slab, plank, log core, squander veneer etc). It also can be utilised to chip non-lignin raw substance (such as flax pole, bulrush, bamboo and so on)
Images :
BX216 wooden chipper specialized parameters:
| Product |
BX216 |
| FEED Dimension(MM) |
230*500 |
| QTY OF FLY KNIVES(PCS) |
2 |
| Velocity OF KNIVES Running(R/M) |
590 |
| MAX DIAMETER FEEDER(MM) |
230 |
| Wooden CHIPS Dimension Concluded(MM) |
30 |
| Ability(T/H) |
7-eight |
| Primary Electricity(KW) |
fifty five |
| FEEDER Electricity(KW) |
3-four |
| OIL PUMP Electrical power(KW) |
1.five |
| Machine Dimension(MM) |
1800*1900*1210 |
| Bodyweight(KG) |
4070 |
Materials and output chips details :
Creation processing :
Our workshop demonstrates :
We guarantee:
1.wood chipper completely machine,every important parts we produced by cnc milling equipment,preserve confident the precision.
2.primary shaft created by specific treatment options,lengthier life span.
three.every device generate based mostly on European common.
Every machine ,prior to the delivery ,we working in our manufacturing facility with the clients essential resources ,make certain all the machine operating effectively right after arrived to consumers crops .If need to have ,we also can deliver engineer to install and tests machine to clientele plants .
We promise:
1.wooden chipper fully machine,every single key components we created by cnc milling equipment,preserve positive the precision.
2.principal shaft produced by unique therapies,longer life time.
three.each equipment make based on European common.
Every single equipment ,just before the delivery ,we operating in our manufacturing facility with the customers required supplies ,make certain all the equipment running well right after arrived to clientele vegetation .If want ,we also can deliver engineer to put in and tests equipment to clientele crops
Wood chips :
And also we have other types for drum wooden chipper ,you should verify the tech info ,if there any iterms you favor ,remember to totally free to give me inquiry .
| Model |
BX-216 |
BX-218 |
BX-2113 |
BX-2113D |
BX-2116 |
| Primary motor kw |
fifty five |
a hundred and ten |
220 |
250 |
710 |
| Knife Qty |
2 |
two |
3 |
4 |
four*two |
| Feeder opener mm |
540×260 |
680×300 |
700×400 |
700×510 |
1250×650 |
| Max. Feeding diameter mm |
230 |
260 |
350 |
450 |
600 |
| Chips dimensions mm |
25-30mm |
twenty five-30mm |
twenty five-30mm |
25-30mm |
twenty five-30mm |
| Capability T/h |
6-8 |
8-15 |
twenty five-thirty |
35-40 |
80-ninety |
| All round measurement mm |
3100×2000
x1500 |
3500×2180
x1800 |
3680×2450
X2050 |
5100×2700
X2300 |
5120x3040x
2330 |
| Weight kg |
4680 |
9100 |
11800 |
14000 |
33000 |
| Feeding conveyor |
6000×550 |
6000×700 |
8000×720 |
8000×720 |
10000×1200 |
| Outlet conveyor |
10000×600 |
10000×800 |
10000×800 |
10000×800 |
10000×1200 |
FAQ:
one.Exactly where is your manufacturing unit?
We loacated in HangZhou metropolis,ZheJiang province, CHINA ,you can fly to HangZhou internation airport.from Airport to manufacturing unit require 40minutes by vehicle.
two.About payment?
We settle for T/T,LC,Wester Union,MoneyGram.
three.Manufacturing time?
Typically for our regular design about 5-7days ,normally regular product need to have want 7-ten times .and also based mostly on order deposit squence to set up produce 1 by one particular.
four.Device motor is 380V,50HZ,3phase,can be modify it?
Of course,certain,Beneath 3phases,we change adjust 415V,500V,600V,220V,230V,50HZ-60HZ.
5.Following sale Support?
On-line services,any issues you should ship e-mail with machine photograph and video,preserve certain send out answers inside of 8hours.
also can offer engineer fly to your factory to CZPT device work and maintenace
US $8,000-40,000
/ Piece
|
|
1 Piece
(Min. Order)
|
###
| After-sales Service: |
on Line Service |
| Warranty: |
1 Year |
| Type: |
Drum Crusher |
| Object: |
Efb |
| Drive: |
Electric |
| Crushing Degree: |
Fine Grinding Machine |
###
###
| Model |
BX216 |
| FEED SIZE(MM) |
230*500 |
| QTY OF FLY KNIVES(PCS) |
2 |
| SPEED OF KNIVES RUNNING(R/M) |
590 |
| MAX DIAMETER FEEDER(MM) |
230 |
| WOOD CHIPS SIZE FINISHED(MM) |
30 |
| CAPACITY(T/H) |
7-8 |
| MAIN POWER(KW) |
55 |
| FEEDER POWER(KW) |
3-4 |
| OIL PUMP POWER(KW) |
1.5 |
| MACHINE SIZE(MM) |
1800*1900*1210 |
| WEIGHT(KG) |
4070 |
###
| Model |
BX-216 |
BX-218 |
BX-2113 |
BX-2113D |
BX-2116 |
| Main motor kw |
55 |
110 |
220 |
250 |
710 |
| Knife Qty |
2 |
2 |
3 |
4 |
4*2 |
| Feeder opener mm |
540×260 |
680×300 |
700×400 |
700×510 |
1250×650 |
| Max. Feeding diameter mm |
230 |
260 |
350 |
450 |
600 |
| Chips size mm |
25-30mm |
25-30mm |
25-30mm |
25-30mm |
25-30mm |
| Capacity T/h |
6-8 |
8-15 |
25-30 |
35-40 |
80-90 |
| Overall size mm |
3100×2000
x1500 |
3500×2180
x1800 |
3680×2450
X2050 |
5100×2700
X2300 |
5120x3040x
2330 |
| Weight kg |
4680 |
9100 |
11800 |
14000 |
33000 |
| Feeding conveyor |
6000×550 |
6000×700 |
8000×720 |
8000×720 |
10000×1200 |
| Outlet conveyor |
10000×600 |
10000×800 |
10000×800 |
10000×800 |
10000×1200 |
US $8,000-40,000
/ Piece
|
|
1 Piece
(Min. Order)
|
###
| After-sales Service: |
on Line Service |
| Warranty: |
1 Year |
| Type: |
Drum Crusher |
| Object: |
Efb |
| Drive: |
Electric |
| Crushing Degree: |
Fine Grinding Machine |
###
###
| Model |
BX216 |
| FEED SIZE(MM) |
230*500 |
| QTY OF FLY KNIVES(PCS) |
2 |
| SPEED OF KNIVES RUNNING(R/M) |
590 |
| MAX DIAMETER FEEDER(MM) |
230 |
| WOOD CHIPS SIZE FINISHED(MM) |
30 |
| CAPACITY(T/H) |
7-8 |
| MAIN POWER(KW) |
55 |
| FEEDER POWER(KW) |
3-4 |
| OIL PUMP POWER(KW) |
1.5 |
| MACHINE SIZE(MM) |
1800*1900*1210 |
| WEIGHT(KG) |
4070 |
###
| Model |
BX-216 |
BX-218 |
BX-2113 |
BX-2113D |
BX-2116 |
| Main motor kw |
55 |
110 |
220 |
250 |
710 |
| Knife Qty |
2 |
2 |
3 |
4 |
4*2 |
| Feeder opener mm |
540×260 |
680×300 |
700×400 |
700×510 |
1250×650 |
| Max. Feeding diameter mm |
230 |
260 |
350 |
450 |
600 |
| Chips size mm |
25-30mm |
25-30mm |
25-30mm |
25-30mm |
25-30mm |
| Capacity T/h |
6-8 |
8-15 |
25-30 |
35-40 |
80-90 |
| Overall size mm |
3100×2000
x1500 |
3500×2180
x1800 |
3680×2450
X2050 |
5100×2700
X2300 |
5120x3040x
2330 |
| Weight kg |
4680 |
9100 |
11800 |
14000 |
33000 |
| Feeding conveyor |
6000×550 |
6000×700 |
8000×720 |
8000×720 |
10000×1200 |
| Outlet conveyor |
10000×600 |
10000×800 |
10000×800 |
10000×800 |
10000×1200 |
Safety Precautions For a PTO Shaft
When you are working around PTOs, be sure to observe several safety precautions. These include removing the shield, keeping a safe distance from the machine, and avoiding entanglement. Entanglement is a serious injury that can even lead to death. Workers who are near the machine should always maintain a safe distance, especially if the speed of the machine is fast enough to entangle clothing. The speed of the PTO is usually 540 to 1,000 revolutions per minute, and the speed is enough to cause injury in a split second.
Safety precautions
One of the most important safety precautions for a PTO shaft is to make sure that it is properly guarded at all times. An unguarded PTO shaft can entanglement a worker, cause an injury, or even cause death. Operator awareness is key in preventing this hazard. Among other things, workers should not make repairs while the PTO is in use or wear loose or frayed clothing when working near the PTO. Likewise, they should read and follow instructions provided with their tractor and implement. Finally, they should use PTO shafts only for their intended purpose.
Another important safety precaution is to wear a protective gear such as a helmet and gloves before operating a PTO shaft. This type of equipment can be extremely dangerous because of its speed. A PTO shaft that is rotating at 540 rpm can travel two metres in less than a second. Damaged shielding is a common cause of entanglement, so it is important to check your machinery for damage before operating it.
When operating a tractor, PTOs should be kept clear of loose clothing. Loose clothing can easily catch on a rotating PTO shaft. Long hair or jewelry can also become entangled in a PTO shaft. It is also important to remember to secure the PTO shaft guard when the tractor is not in use. Also, never engage a PTO when the engine is off.
Types of pto shafts
PTO shafts are used in tractors and other equipment to secure the secondary gear in the tractor. They are available in different styles and sizes. These shafts are designed to withstand pressure, impacts, and tension. They may also include a shear pin and slip clutch. Before buying a new PTO shaft, make sure to check its measurements.
There are two types of PTO shafts available in an Agric rototiller. The first one has a slip clutch and the other has a shear pin safety device. In order to identify the type of PTO shaft used in a particular tractor, it is important to understand what it is used for.
There are two types of PTO shafts: the external and internal. The latter is used for larger machines, such as a lawnmower. The former is suitable for agricultural applications and is the preferred type for large tractors. The former is suitable for plowing, mowing, and shredding.
Transmission PTO shafts are the oldest type of PTO. They are connected to the tractor’s transmission. When a tractor is in gear, it stops the PTO shaft. However, when it’s not, it’s ineffective and can pose serious problems, such as when mowing. This type of PTO can also cause an overrun clutch to prevent the PTO shaft from working properly.
Reaction time
It’s important to know your reaction time when working around a power take-off (PTO) shaft. This part of the machine rotates at approximately 540 revolutions per minute and can pull in seven feet per second. Reaction time can be affected by age, physical condition, medications, lack of sleep, and stress. If you’re working around a PTO, be sure to remove any loose jewelry or other items that might interfere with your reaction time.
PTO accidents can be caused by several factors. The operator, the machine, and the environment all play a role. The operator’s physical and mental condition can also contribute to unsafe actions. For example, young operators may lack the knowledge and experience to recognize hazards. Older workers may also have slower reaction times, which can make it difficult to react quickly to slippery work areas.
Reaction time is measured as the time between a stimulus and the response. It does not include the time required to move the hand. Reaction time is a critical factor in sports, where athletes need to be quick to respond to the moves of their opponents. A good reaction time is necessary to score points.
A demonstration of the speed of a PTO shaft is a great tool to demonstrate how dangerous this part of a machine can be. To demonstrate the speed, use a 7-foot sash cord tied to a sliding collar universal joint. Select a 540-rpm PTO shaft, and a three-inch diameter shield. In one second, the rotating shaft makes nine revolutions and travels 7.1 feet. However, a cordless drill does not rotate at full speed and will take at least two seconds to wrap around the string.
Standardization
The standardization of PTO shafts in tractors is a major project. The EU Machinery Directive requires the protection of operators from rotating parts, such as the PTO. This is especially important when parts are accessible, as clothing can easily be wrapped around them, resulting in an accident. To prevent such accidents, manufacturers have begun to install non-rotating guards over the PTO drive shaft. These guards comply with the current EU good practice.
The European Standard EN 12965:2003+A2:2009 specifies the safety requirements for PTO drive shafts and their guards. It also specifies safe working practices for these components. The standard was approved by CEN on 16 September 2019. It is important to follow these regulations to ensure safe operation.
In the 1980s, a movement began among agricultural engineers to standardize the PTO shaft. The movement began because the different types of PTO shafts had not been interchangeable. A common example is the Deutz-Fendt shaft, which had become a standard for tractors.
As the power for PTO drives comes from the gearbox, the counter shaft acts as the PTO outlet. Standardization of PTO speeds makes it easier for manufacturers to design equipment to meet a specified speed. For example, a thresher is expected to run at a specific peripheral velocity of the threshing cylinder, which is a function of standard PTO speeds. This also allows designers to plan pulley arrangements with the standard PTO speed in mind.
Safety chains
The PTO shaft is an integral part of a tractor or implement, so it’s essential to secure it with safety chains. These chains are welded to both ends of the shaft and serve as backup connections between the tractor and trailer coupling point. There are several types of chains available, from domestic to metric, to meet your specific needs.
Because of the high speeds of PTO shafts, it’s crucial to protect these parts from being tangled. A single fall of a PTO shaft can cause serious injury or even death. In such an unfortunate situation, safety chains can prevent such injuries. PTO shafts are also extremely dangerous because the components can become hot while they are operating.
In addition to safety chains, operators must also be aware of the hazards that can occur when working near a PTO shaft. Unsafe behaviors, such as performing repairs while operating a machine, or wearing frayed clothing can lead to serious injury or death. In addition, all users should follow the instructions on the tractor or implement they’re using. It’s also essential to use a PTO shaft for its intended purpose.
In addition to safety chains, farmers should also ensure that the PTO drive shaft is securely attached to the tractor or implement. A broken or damaged PTO guard can be just as dangerous as an unprotected shaft. In addition, a poorly fitting PTO guard may provide a false sense of security. For this reason, it’s important to use protective clothing when operating a tractor or implement powered by a PTO.
Shield
The CZPT-Co universal fit PTO shaft shield is a simple and easy to use shield that has a patented lever release. The shield comes in two sizes, the smaller diameter shield is for shafts with a diameter of 1 5/16″ to 2 1/8″ and the larger diameter shield fits shafts of 2″ to 3 1/8″. Each shield is pre-installed with an assortment of bearings. The shield’s length is measured from the end of the yoke bearing groove to the other end.
If you’ve ever tried to work on a PTO shaft, you know that it can be frustrating. A PTO shaft shield is a safety device that covers the shaft and prevents it from rotating. These shields are also designed to be easy to connect and remove. The CZPT safety clip makes it easy to connect or disconnect the shield, and locks into place to prevent it from rotating with the inner driveshaft. The CZPT material used in RPM Transmissions driveline safety shields is strong and rigid.
Another improvement of this PTO shaft shield is the bracket that supports the two-piece PTO shaft and outer shield. The bracket is shown in FIG. 2 as an angled front view. FIG. 7 is a side elevation view of the bracket mounted to the machine tongue.
editor by czh 2023-01-04
The Power Take-Off (PTO) shaft is a mechanical coupling system that couples an aircraft’s accessory gear box with an engine. It transmits high rpm and peak torque. It is an indigenously developed product, which has been cleared for flight fitment and successfully completed an engine ground run test. It is now being used by two Indian manufacturers.
Operator awareness is key in preventing PTO shaft entanglement. It is important to avoid performing any repairs while the machine is operating. It is also important to avoid wearing loose or frayed clothing that could become entangled in the rotating shaft. It is also essential to read and follow the tractor’s operating manual. Also, ensure that the PTO shaft is only used for its intended purpose.
A PTO shaft is a very important part of a tractor because it transfers power to an attached attachment. These attachments typically include rotary tillers, brush cutters, hush hug, and mowers. While many attachments use a PTO shaft, the connection flange is not standardized. Some older models of tractors may have a connection flange that is closer to the tractor.
The power take-off (PTO) shaft of a tractor can be controlled to operate in one of two modes: automatic and manual. Automatic mode operates when the PTO shaft starts turning and is automatically engaged when the power lift is raised by actuating the lift lever 9. Manual mode operates when the lift lever is not raised.
A PTO shaft has two parts: an input and an output. The input portion of a PTO adapter shaft has a smaller diameter, and the output portion has a larger diameter. Both are connected by splines. These splines have tapered outer ends. The first bore 25 has a first frustoconical wall, while the second bore has a second frustoconical wall.
One of the most important things to do in order to keep your PTO shaft in top condition is to keep it properly greased. This can be done by using a grease gun or a hand pump. It is important to keep the grease fresh and apply it in the appropriate amounts depending on how much you use the PTO. It is also important to separate the primary and secondary shafts and remove any debris from them.