Tag Archives: hog bush

China manufacturer Pto Shaft Fit for Bush Hog Ath 600 and Ath 720, Ath 900, Fth 480, Fth 600, Fth 720, Mth 600, Mth 720 Series Mowers

Product Description

Pto Shaft fit for Bush Hog ATH 600 and ATH 720, ATH 900, FTH 480, FTH 600, FTH 720, MTH 600, MTH 720 Series Mowers

Replacement PTO shaft for Finish Mowers, Tillers, Spreaders, Hay Tedders and many more applications.

PTO is a series 4, rated for 40HP it has 1-3/8″ 6 spline push pin on both ends for easy installment. Complete with safety shield, The PTO measures 43″ from end to end and has an 58″ maximum extended length.

These PTO shafts fit the following Finish Mowers:

Bush Hog: ATH 600 and ATH 720, ATH 900, FTH 480, FTH 600, FTH 720, MTH 600, MTH 720 Series Mowers;

Landpride: FDR1548, FDR1560, FDR1572, FDR1648, FDR1660, FDR1672, FDR2548, FDR2560, FDR2572, AT2660, AT2672 Series Mowers;

Kubota: BL348A, B342A; Caroni TC480, TC590, TC710, TC910 with spline Input Shaft;

Befco most late models with splined input shafts, early models had some with smooth input shaft;

CHINAMFG all Models;

Douglas all Models;

Tecma all Models;

Sovema all Models;

Maschio all Models;

CHINAMFG all Models;

Sicma all Models;

First Choice all Models

Type:	Pto Shaft
Usage:	Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Flail Mower Truck
Material:	All
Power Source:	Electricity
Weight:	OEM
After-sales Service:	Installation Guide

How do PTO shafts handle variations in length and connection methods?

PTO (Power Take-Off) shafts are designed to handle variations in length and connection methods to accommodate different equipment setups and ensure efficient power transfer. PTO shafts need to be adjustable in length to bridge the distance between the power source and the driven machinery. Additionally, they must provide versatile connection methods to connect to a wide range of equipment. Here’s a detailed explanation of how PTO shafts handle variations in length and connection methods:

1. Telescoping Design: PTO shafts often feature a telescoping design, allowing them to be adjusted in length to suit different equipment configurations. The telescoping feature enables the shaft to extend or retract, accommodating varying distances between the power source (such as a tractor or engine) and the driven machinery. By adjusting the length of the PTO shaft, it can be properly aligned and connected to ensure optimal power transfer. Telescoping PTO shafts typically consist of multiple tubular sections that slide into one another, providing flexibility in length adjustment.

2. Splined Shafts: PTO shafts commonly employ splined shafts as the primary connection method between the power source and driven machinery. Splines are a series of ridges or grooves along the shaft that interlock with corresponding grooves in the mating component. The splined connection allows for torque transfer while maintaining alignment between the power source and driven machinery. Splined shafts can handle variations in length by extending or retracting the telescoping sections while still maintaining a solid connection between the power source and the driven equipment.

3. Adjustable Sliding Yokes: PTO shafts typically feature adjustable sliding yokes on one or both ends of the shaft. These yokes allow for angular adjustment, accommodating variations in the alignment between the power source and driven machinery. The sliding yokes can be moved along the splined shaft to achieve the desired angle and maintain proper alignment. This flexibility ensures that the PTO shaft can handle length variations while ensuring efficient power transfer without placing excessive strain on the universal joints or other components.

4. Universal Joints: Universal joints are integral components of PTO shafts that allow for angular misalignment between the power source and driven machinery. They consist of a cross-shaped yoke with bearings that transmit torque between connected shafts while accommodating misalignment. Universal joints provide flexibility in connecting PTO shafts to equipment that may not be perfectly aligned. As the PTO shaft length varies, the universal joints compensate for the changes in angle, allowing for smooth power transmission even when there are variations in length or misalignment between the power source and driven machinery.

5. Coupling Mechanisms: PTO shafts utilize various coupling mechanisms to securely connect to the power source and driven machinery. These mechanisms often involve a combination of splines, bolts, locking pins, or quick-release mechanisms. The coupling methods can vary depending on the specific equipment and industry requirements. The versatility of PTO shafts allows for the use of different coupling methods, ensuring a reliable and secure connection regardless of the length variation or equipment configuration.

6. Customization Options: PTO shafts can be customized to handle specific length variations and connection methods. Manufacturers offer options to select different lengths of telescoping sections to match the specific distance between the power source and driven machinery. Additionally, PTO shafts can be tailored to accommodate various connection methods through the selection of splined shaft sizes, yoke designs, and coupling mechanisms. This customization enables PTO shafts to meet the specific requirements of different equipment setups, ensuring optimal power transfer and compatibility.

7. Safety Considerations: When handling variations in length and connection methods, it is essential to consider safety. PTO shafts incorporate protective guards and shields to prevent accidental contact with rotating components. These safety measures must be appropriately adjusted and installed to provide adequate coverage and protection, regardless of the PTO shaft’s length or connection configuration. Safety guidelines and regulations should be followed to ensure the proper installation, adjustment, and use of PTO shafts in order to prevent accidents or injuries.

By incorporating telescoping designs, splined shafts, adjustable sliding yokes, universal joints, and versatile coupling mechanisms, PTO shafts can handle variations in length and connection methods. The flexibility of PTO shafts allows them to adapt to different equipment setups, ensuring efficient power transfer while maintaining alignment and safety.

pto shaft

Are there any limitations or disadvantages associated with PTO shafts?

While PTO (Power Take-Off) shafts offer numerous advantages in terms of power transfer and versatility, they also have certain limitations and disadvantages. It’s important to consider these factors when using PTO shafts to ensure safe and efficient operation. Here’s a detailed explanation of some limitations and disadvantages associated with PTO shafts:

1. Safety Hazards: One of the primary concerns with PTO shafts is the potential for safety hazards. PTO shafts rotate at high speeds and can pose a significant risk if not properly guarded or handled. Accidental contact with an exposed or inadequately shielded PTO shaft can result in severe injuries, including entanglement, amputation, or even fatalities. It is crucial to follow safety guidelines, implement proper guarding, and ensure that operators are well-trained on safe handling practices to mitigate these risks.

2. Maintenance and Lubrication: PTO shafts require regular maintenance and lubrication to ensure optimal performance and longevity. The moving parts, such as universal joints and splines, need to be inspected, cleaned, and lubricated at recommended intervals. Neglecting maintenance can lead to premature wear, decreased efficiency, and potential failures. Proper maintenance practices, including regular inspections and timely lubrication, are essential to mitigate these issues.

3. Alignment and Angles: PTO shafts rely on proper alignment and angles to ensure efficient power transfer. Misalignment or excessive angles between the power source and driven machinery can cause increased wear and strain on the components, leading to premature failure. Ensuring proper alignment and angle adjustment, using adjustable sliding yokes or other means, is important to prevent excessive stress on the PTO shaft and associated equipment.

4. Length Limitations: PTO shafts have limitations on their maximum and minimum length due to engineering constraints. The telescoping design allows for some adjustment, but there is a practical limit to how much the shaft can extend or retract. If the distance between the power source and driven machinery exceeds the maximum or falls below the minimum length of the PTO shaft, alternative solutions or modifications may be required. In some cases, additional components such as drive shaft extensions or gearboxes may be necessary to bridge the distance.

5. Compatibility: While manufacturers strive to ensure compatibility, there can still be challenges in finding the right PTO shaft for specific equipment configurations. Equipment may have unique requirements in terms of spline sizes, torque ratings, or connection methods that may not be readily available or compatible with off-the-shelf PTO shafts. Customization may be required to address these compatibility issues, which can result in increased costs or lead times.

6. Noise and Vibrations: PTO shafts in operation can generate significant noise and vibrations, especially at higher speeds. This can be a nuisance for operators and may require additional measures to reduce noise levels or dampen vibrations. Excessive vibrations can also affect the overall performance and lifespan of the PTO shaft and connected equipment. Implementing vibration dampeners or using flexible couplings can help mitigate these issues.

7. Power Limits: PTO shafts have specific power limits based on their design, materials, and components. Exceeding these power limits can lead to premature wear, component failures, or even shaft breakage. It is crucial to understand and adhere to the recommended power ratings for PTO shafts to ensure safe and reliable operation. In some cases, upgrading to a higher-capacity PTO shaft or implementing additional power transmission components may be necessary to accommodate higher power requirements.

8. Complex Installation and Removal: Installing and removing PTO shafts can be a complex process, especially in confined spaces or when dealing with heavy equipment. It may require aligning splines, engaging couplings, and securing locking mechanisms. Improper installation or removal techniques can lead to damage to the shaft or associated equipment. Proper training, handling equipment, and following manufacturer guidelines are essential to simplify and ensure the safe installation and removal of PTO shafts.

Despite these limitations and disadvantages, PTO shafts remain widely used and valuable components for power transfer in various industries. By addressing these considerations and implementing proper safety measures, maintenance practices, and alignment procedures, the potential drawbacks of PTO shafts can be effectively mitigated, allowing for safe and efficient operation.

pto shaft

What benefits do PTO shafts offer for various types of machinery?

PTO shafts (Power Take-Off shafts) offer several benefits for various types of machinery in agricultural and industrial applications. They provide a flexible and efficient means of power transmission, enabling machinery to perform specific tasks and functions. Here’s a detailed explanation of the benefits that PTO shafts offer for different types of machinery:

Versatility: PTO shafts contribute to the versatility of machinery by allowing them to be powered by a common power source, such as a tractor or an engine. This means that a single power source can be used to drive multiple implements or machines by simply connecting and disconnecting the PTO shaft. For example, in agriculture, a tractor equipped with a PTO shaft can power various implements such as mowers, balers, tillers, sprayers, and grain augers. Similarly, in industrial applications, PTO shafts enable the use of a single engine or motor to power different machines or equipment, such as generators, pumps, compressors, and industrial mixers.

Efficiency: PTO shafts offer an efficient method of power transfer from the power source to the machinery. By directly connecting the power source to the driven machine, PTO shafts minimize energy losses that may occur with other power transmission methods. This direct power transfer results in improved overall efficiency and performance of the machinery. Additionally, PTO shafts allow for the adjustment of rotational speed and power output to match the requirements of the specific machinery, ensuring optimal operation and reducing unnecessary energy consumption.

Cost Savings: The use of PTO shafts can lead to cost savings in multiple ways. Firstly, by utilizing a single power source to drive multiple machines or implements, the need for separate engines or motors for each piece of equipment is eliminated, reducing capital costs. Secondly, PTO shafts eliminate the requirement for additional fuel or energy sources, as they tap into the existing power source, resulting in lower fuel or energy expenses. Additionally, the versatility offered by PTO shafts allows for improved equipment utilization, maximizing the return on investment.

Flexibility: PTO shafts provide flexibility in terms of equipment setup and configuration. They can be adjusted in length or equipped with telescopic sections, allowing for easy adaptation to different equipment arrangements and varying distances between the power source and the driven machinery. This flexibility enables operators to quickly connect and disconnect the PTO shafts as needed, facilitating efficient equipment changes and reducing downtime. Moreover, the ability to adjust the rotational speed and power output of the PTO shafts adds further flexibility, accommodating the specific requirements of different machinery and applications.

Ease of Use: PTO shafts are relatively easy to use, making them accessible to operators with minimal training. The process of connecting and disconnecting the PTO shafts is straightforward, often involving a simple coupling or locking mechanism. This ease of use enhances equipment operability, allowing operators to quickly switch between different implements or machines without significant effort or time-consuming procedures. Furthermore, the direct power transfer through PTO shafts simplifies equipment operation, as the machinery can be powered by the existing power source without the need for additional controls or power management systems.

Increased Productivity: PTO shafts contribute to increased productivity in agricultural and industrial operations. By enabling the use of versatile machinery configurations, operators can perform a wide range of tasks using a single power source. This eliminates the need for manual labor or the use of multiple machines, streamlining workflow and reducing the time required to complete various operations. The efficiency and reliability of power transfer through PTO shafts also contribute to improved productivity by ensuring consistent and effective operation of machinery, resulting in enhanced output and reduced downtime.

Safety: While not directly related to machinery performance, PTO shafts also offer safety benefits. The implementation of safety shields or guards on PTO shafts helps prevent accidental contact with the rotating shaft, reducing the risk of injuries to operators. These safety features are designed to cover the rotating shaft and universal joints, ensuring that operators cannot come into contact with them during operation. Proper training on PTO shaft operation and adherence to safety guidelines further enhance operator safety when working with PTO-driven machinery.

In summary, PTO shafts offer a range of benefits for various types of machinery. These benefits include increased versatility, improved efficiency, cost savings, flexibility in equipment configurations, ease of use, increased productivity, and enhanced operator safety. PTO shafts play a crucial role in agricultural and industrial applications by enabling the direct power transfer from a common power source to different machines or implements, resulting in optimized performance and operational effectiveness.

China manufacturer Pto Shaft Fit for Bush Hog Ath 600 and Ath 720, Ath 900, Fth 480, Fth 600, Fth 720, Mth 600, Mth 720 Series Mowers
editor by CX 2024-04-10

China Good quality CE Certification Agricultural Wide Angle Tractor Factory Supply 6 Spline 540 Pto Drive Shaft for Bush Hog with Yoke Adapter Parts

Product Description

CE Certification Agricultural Wide Angle Tractor Factory Supply 6 Spline 540 Pto Drive Shaft for Bush Hog with Yoke Adapter Parts

Product Description

PTO drive shaft

Brand New Replacement PTO shaft for Finish Mowers, Tillers, Spreaders, Hay Tedders and many more applications.

These PTO shafts fit the following Finish Mowers:

Bush Hog: ATH 600 and ATH 720, ATH 900, FTH 480, FTH 600, FTH 720, MTH 600, MTH 720 Series Mowers;

Landpride: FDR1548, FDR1560, FDR1572, FDR1648, FDR1660, FDR1672, FDR2548, FDR2560, FDR2572, AT2660, AT2672 Series Mowers;

Kubota: BL348A, B342A; Caroni TC480, TC590, TC710, TC910 with spline Input Shaft;

Ever-power most late models with splined input shafts, early models had some with smooth input shaft;

1. PTO Drive Shafts

PTO SHAFT WITH QUICK RELEASE YOKES AND OVER-RUNNING CLUTCH(RA), YOU CAN CHOOSE THE LENGTH
Chinabase is a professional manufacturer of PTO SHAFTS for farm machines and agricultural tractors from China. We provide more than 8 sizes of PTO shafts. There is also a full range of safety devices for agricultural applications. Our products are sold to America, Europe and all over the world. We will supply best quality products in most reasonable price.
Following are the tips how to order your PTO shafts:

2. Closed overall length (or cross to cross) of a PTO shaft.

3. Tubes or Pipes
We’ve already got Triangular profile tube and Lemon profile tube for all the series we provide.
And we have some star tube, splined tube and other profile tubes but only for a certain sizes.

4. End yokes
We’ve got 13 types of splined yokes and 8 types of plain bore yokes. I will suggest the usual type for your reference.
You can also send drawings or pictures to us if you cannot find your item in our catalog.

5. Safety devices or clutches
I will attach the details of safety devices for your reference. We’ve already have Free wheel (RA), Ratchet torque limiter(SA),
Shear bolt torque limiter(SB), 3types of friction torque limiter (FF,FFS,FCS) and overrunning couplers(adapters) (FAS).

6. For any other more special requirements with plastic guard, connection method, color of painting, package, etc., please feel free to let me know.

Tube types


Spline tube	Lemon tube

Star tube	Trigonal tube

Function of PTO Shaft	Drive Shaft Parts & Power Transmission
Usage of PTO Shaft	Kinds of Tractors & Farm Implements
Yoke Types for PTO Shaft	Double push pin, Bolt pins, Split pins, Pushpin, Quick release, Ball attachment, Collar…..
Processing Of Yoke	Forging
PTO Shaft Plastic Cover	YW; BW; YS; BS; Etc
Colors of PTO Shaft	Green; Orange; Yellow; Black Ect.
PTO Shaft Series	T1-T10; L1-L6;S6-S10;10HP-150HP with SA,RA,SB,SFF,WA,CV Etc
Tube Types for PTO Shaft	Lemon, Triangular, Star, Square, Hexangular, Spline, Special Ect
Processing Of Tube	Cold drawn
Spline Types for PTO Shaft	1 1/8″ Z6;1 3/8″ Z6; 1 3/8″ Z21 ;1 3/4″ Z20; 1 3/4″ Z6; 8-38326 8-42367; 8-48428;

Application

Company Profile

Our factory is a leading manufacturer of PTO shaft yoke and universal joint.

We manufacture high quality PTO yokes for various vehicles, construction machinery and equipment. All products are constructed with rotating lighter.

We are currently exporting our products throughout the world, especially to North America, South America, Europe, and Russia. If you are interested in any item, please do not hesitate to contact us. We are looking CHINAMFG to becoming your suppliers in the near future.

Packaging & Shipping

Certifications

Material:	Carbon Steel
Load:	Drive Shaft
Stiffness & Flexibility:	Flexible Shaft
Journal Diameter Dimensional Accuracy:	IT6-IT9
Axis Shape:	Straight Shaft
Shaft Shape:	Real Axis

Samples:	US$ 9999/Piece 1 Piece(Min.Order) \| Request Sample

How do PTO shafts handle variations in length and connection methods?

pto shaft

Can you provide real-world examples of equipment that use PTO shafts?

Power Take-Off (PTO) shafts are extensively used in various industries, particularly in agriculture and construction. They provide a reliable power source for a wide range of equipment, enabling efficient operation and increased productivity. Here are some real-world examples of equipment that commonly use PTO shafts:

1. Agricultural Machinery:

Tractor Implements: A wide array of tractor-mounted implements rely on PTO shafts for power transfer. These include:

Mowers and rotary cutters
Balers and hay equipment
Tillers and cultivators
Seeders and planters
Sprayers
Manure spreaders
Harvesters, such as combine harvesters and forage harvesters

Stationary Equipment: PTO shafts are also used in stationary agricultural equipment, including:

Feed grinders and mixers
Silo unloaders
Grain augers and elevators
Irrigation pumps
Wood chippers and shredders
Stump grinders

2. Construction and Earthmoving Equipment:

Backhoes and Excavators: PTO shafts can be found in backhoes and excavators, powering attachments such as augers, hydraulic hammers, and brush cutters.
Post Hole Diggers: Post hole diggers used for fence installation often rely on PTO shafts to transfer power to the digging mechanism.
Trenchers: Trenching machines equipped with PTO shafts efficiently dig trenches for utility installations, drainage systems, or irrigation lines.
Stump Grinders: Stump grinders used in land clearing and tree removal operations often utilize PTO shafts to power their cutting blades.
Soil Stabilizers and Road Reclaimers: These machines use PTO shafts to drive the rotor and milling drums, which pulverize and mix materials for road construction and maintenance.

3. Forestry Equipment:

Wood Chippers: Wood chippers used for processing tree branches and logs into wood chips are commonly powered by PTO shafts.
Brush Cutters and Mulchers: PTO-driven brush cutters and mulchers are employed to clear vegetation and maintain forested areas.
Log Splitters: Log splitters that split logs into firewood often utilize PTO shafts to power the splitting mechanism.

4. Utility Equipment:

Generators: Some generators are designed to be driven by PTO shafts, providing an auxiliary power source for various applications in remote locations or during power outages.
Pumps: PTO-driven pumps are commonly used for agricultural irrigation, water transfer, and dewatering applications.

5. Specialty Equipment:

Ice Resurfacers: PTO shafts are employed in ice resurfacing machines used in ice rinks to maintain a smooth ice surface for ice hockey and figure skating.
Air Compressors: Some air compressors are driven by PTO shafts, providing a source of compressed air for various applications.

These examples represent a range of equipment that extensively relies on PTO shafts for power transfer. PTO shafts enable the efficient operation of these machines, increasing productivity and versatility across various industries.

pto shaft

What is a PTO shaft and how is it used in agricultural and industrial equipment?

A power take-off (PTO) shaft is a mechanical component used in agricultural and industrial equipment to transfer power from a power source, such as an engine or motor, to another machine or implement. It is a driveline shaft that transmits rotational power and torque, allowing the connected equipment to perform various tasks. PTO shafts are commonly used in agricultural machinery, such as tractors, as well as in industrial equipment, including generators, pumps, and construction machinery. Here’s a detailed explanation of what a PTO shaft is and how it is used:

Structure and Components: A typical PTO shaft consists of a hollow metal tube with universal joints at each end. The hollow tube allows the shaft to rotate freely, while the universal joints accommodate angular misalignments between the power source and the driven equipment. The universal joints consist of a cross-shaped yoke with needle bearings, providing flexibility and allowing the transmission of power at varying angles. Some PTO shafts may also include a telescopic section to adjust the length for different equipment setups or to accommodate varying distances between the power source and the driven machine.

Power Transfer: The primary function of a PTO shaft is to transfer power and torque from the power source to the driven equipment. The power source, typically an engine or motor, drives the PTO shaft through a mechanical connection, such as a gearbox or a clutch. As the power source rotates, it transmits rotational force to the PTO shaft. The PTO shaft, in turn, transfers this rotational power and torque to the driven equipment, enabling it to perform its intended function. The torque and rotational speed transmitted through the PTO shaft depend on the power source’s characteristics and the gear ratio or clutch engagement.

Agricultural Applications: In agriculture, PTO shafts are commonly used in tractors to power various implements and attachments. The PTO shaft is connected to the tractor’s power take-off, a rotating drive shaft located at the rear of the tractor. By engaging the PTO clutch, the tractor’s engine power is transferred through the PTO shaft to the attached implements. Agricultural machinery, such as mowers, balers, tillers, sprayers, and grain augers, often rely on PTO shafts to receive power for their operation. The PTO shaft allows the implements to be powered directly by the tractor’s engine, eliminating the need for separate power sources and increasing the versatility and efficiency of agricultural operations.

Industrial Applications: PTO shafts also find extensive use in various industrial applications. Industrial equipment, such as generators, pumps, compressors, and industrial mixers, often incorporate PTO shafts to receive power from engines or electric motors. The PTO shaft connects the power source to the driven equipment, allowing it to operate and perform its intended function. In construction machinery, PTO shafts can be found in equipment like concrete mixers, hydraulic hammers, and post hole diggers, enabling the transfer of power from the machinery’s engine to the specific attachment or tool being used.

Safety Considerations: It is important to note that PTO shafts can pose safety risks if not handled properly. The rotating shaft can cause serious injuries if operators come into contact with it while it is in operation. To ensure safety, PTO shafts are often equipped with shielding or guards that cover the rotating shaft and universal joints, preventing accidental contact. It is crucial to maintain and inspect these safety features regularly to ensure their effectiveness. Additionally, operators should receive proper training on PTO shaft operation, including safe attachment and detachment procedures, as well as the use of personal protective equipment when working near PTO-driven machinery.

In summary, a PTO shaft is a mechanical component used in agricultural and industrial equipment to transmit power and torque from a power source to a driven machine or implement. It enables the direct power transfer from engines or motors to various equipment, increasing efficiency and versatility in agricultural and industrial operations. While PTO shafts offer significant benefits, operators must be aware of the associated safety considerations and take appropriate precautions to prevent accidents and injuries.

China Good quality CE Certification Agricultural Wide Angle Tractor Factory Supply 6 Spline 540 Pto Drive Shaft for Bush Hog with Yoke Adapter Parts
editor by CX 2024-03-18

China Professional CE Certification Agricultural Wide Angle Tractor Factory Supply 6 Spline 540 Pto Drive Shaft for Bush Hog with Yoke Adapter Parts

Product Description

CE Certification Agricultural Wide Angle Tractor Factory Supply 6 Spline 540 Pto Drive Shaft for Bush Hog with Yoke Adapter Parts

Product Description

PTO drive shaft

Brand New Replacement PTO shaft for Finish Mowers, Tillers, Spreaders, Hay Tedders and many more applications.

These PTO shafts fit the following Finish Mowers:

Bush Hog: ATH 600 and ATH 720, ATH 900, FTH 480, FTH 600, FTH 720, MTH 600, MTH 720 Series Mowers;

Landpride: FDR1548, FDR1560, FDR1572, FDR1648, FDR1660, FDR1672, FDR2548, FDR2560, FDR2572, AT2660, AT2672 Series Mowers;

Kubota: BL348A, B342A; Caroni TC480, TC590, TC710, TC910 with spline Input Shaft;

Ever-power most late models with splined input shafts, early models had some with smooth input shaft;

1. PTO Drive Shafts

2. Closed overall length (or cross to cross) of a PTO shaft.

6. For any other more special requirements with plastic guard, connection method, color of painting, package, etc., please feel free to let me know.

Tube types


Spline tube	Lemon tube

Star tube	Trigonal tube

Function of PTO Shaft	Drive Shaft Parts & Power Transmission
Usage of PTO Shaft	Kinds of Tractors & Farm Implements
Yoke Types for PTO Shaft	Double push pin, Bolt pins, Split pins, Pushpin, Quick release, Ball attachment, Collar…..
Processing Of Yoke	Forging
PTO Shaft Plastic Cover	YW; BW; YS; BS; Etc
Colors of PTO Shaft	Green; Orange; Yellow; Black Ect.
PTO Shaft Series	T1-T10; L1-L6;S6-S10;10HP-150HP with SA,RA,SB,SFF,WA,CV Etc
Tube Types for PTO Shaft	Lemon, Triangular, Star, Square, Hexangular, Spline, Special Ect
Processing Of Tube	Cold drawn
Spline Types for PTO Shaft	1 1/8″ Z6;1 3/8″ Z6; 1 3/8″ Z21 ;1 3/4″ Z20; 1 3/4″ Z6; 8-38326 8-42367; 8-48428;

Application

Company Profile

Our factory is a leading manufacturer of PTO shaft yoke and universal joint.

We manufacture high quality PTO yokes for various vehicles, construction machinery and equipment. All products are constructed with rotating lighter.

Packaging & Shipping

Certifications

Material:	Carbon Steel
Load:	Drive Shaft
Stiffness & Flexibility:	Flexible Shaft
Journal Diameter Dimensional Accuracy:	IT6-IT9
Axis Shape:	Straight Shaft
Shaft Shape:	Real Axis

Samples:	US$ 9999/Piece 1 Piece(Min.Order) \| Request Sample

What maintenance practices are essential for prolonging the lifespan of PTO shafts?

Maintaining proper care and performing regular maintenance on Power Take-Off (PTO) shafts is crucial for prolonging their lifespan and ensuring optimal performance. By following essential maintenance practices, you can prevent premature wear, identify potential issues early on, and maximize the longevity of your PTO shafts. Here are some key maintenance practices to consider:

1. Regular Inspection: Perform routine visual inspections of the PTO shaft to check for any signs of damage, wear, or misalignment. Look for cracks, dents, bent sections, or loose components. Inspect the universal joints, coupling mechanisms, protective guards, and other associated parts. Pay attention to any unusual noises, vibrations, or changes in performance, as these can indicate underlying issues that require attention.

2. Lubrication: Proper lubrication is essential for the smooth operation and longevity of PTO shafts. Follow the manufacturer’s recommendations regarding lubrication intervals and use the recommended lubricant type. Apply lubrication to the universal joints, CV joints (if applicable), and other moving parts as specified. Regularly check for adequate lubricant levels and replenish if necessary. Ensure that the lubricant used is compatible with the shaft material and does not attract dirt or debris that could cause abrasion or damage.

3. Cleaning: Keep the PTO shaft clean and free from dirt, debris, and other contaminants. Regularly remove any accumulated dirt, grease, or residue using a brush or compressed air. Be particularly diligent in cleaning the universal joints and areas where the shaft connects to other components. Cleaning prevents the buildup of abrasive particles that can accelerate wear and compromise the shaft’s performance.

4. Guard Inspection and Maintenance: Check the protective guards and shields regularly to ensure they are securely in place and free from damage. Guards play a critical role in preventing accidental contact with the rotating shaft and minimizing the risk of injury. Repair or replace any damaged or missing guards promptly. Ensure that the guards are correctly aligned and provide sufficient coverage for all moving parts of the PTO shaft.

5. Torque and Fastener Checks: Periodically inspect and check the torque of fasteners, such as bolts and nuts, that secure the PTO shaft and associated components. Over time, vibration and normal operation can loosen these fasteners, compromising the integrity of the shaft. Use the appropriate torque specifications provided by the manufacturer to ensure proper tightening. Regularly verify the tightness of fasteners and retighten as necessary.

6. Shear Bolt or Slip Clutch Maintenance: If your PTO shaft incorporates shear bolt or slip clutch mechanisms, ensure they are functioning correctly. Inspect the shear bolts for signs of wear or damage, and replace them when necessary. Check the slip clutch for proper adjustment and smooth operation. Follow the manufacturer’s recommendations regarding maintenance and adjustment of these safety mechanisms to ensure their effectiveness in protecting the driveline components.

7. Proper Storage: When the PTO shaft is not in use, store it in a clean and dry environment. Protect the shaft from exposure to moisture, extreme temperatures, and corrosive substances. If possible, store the shaft in a vertical position to prevent bending or distortion. Consider using protective covers or cases to shield the shaft from dust, dirt, and other potential sources of damage.

8. Operator Training: Provide proper training to operators on the correct operation, maintenance, and safety procedures related to the PTO shafts. Educate them about the importance of regular inspections, lubrication, and adherence to recommended maintenance practices. Encourage operators to report any abnormalities or concerns promptly to prevent further damage and ensure timely repairs or adjustments.

9. Manufacturer and Expert Guidance: Consult the manufacturer’s guidelines and recommendations regarding maintenance practices specific to your PTO shaft model. Additionally, seek advice from experts or authorized service technicians who are knowledgeable about PTO shaft maintenance. They can provide valuable insights and assistance in implementing the best maintenance practices for your specific PTO shafts.

By following these maintenance practices, you can extend the lifespan of your PTO shafts, optimize their performance, and reduce the likelihood of unexpected failures or costly repairs. Regular inspections, lubrication, cleaning, guard maintenance, torque checks, and proper storage are all essential in ensuring the longevity and reliability of your PTO shafts.

pto shaft

How do PTO shafts contribute to the efficiency of agricultural operations?

Power Take-Off (PTO) shafts play a crucial role in improving the efficiency of agricultural operations by providing a versatile and reliable power source for various farming equipment. PTO shafts allow agricultural machinery to access power from tractors or other prime movers, enabling the efficient transfer of energy to perform a wide range of tasks. Here’s a detailed explanation of how PTO shafts contribute to the efficiency of agricultural operations:

1. Versatility: PTO shafts offer versatility by allowing the connection of different types of implements and machinery to tractors or other power sources. This versatility enables farmers to use a single power unit, such as a tractor, to operate multiple agricultural implements, including mowers, balers, tillers, seeders, sprayers, and more. The ability to quickly switch between various implements using a PTO shaft minimizes downtime and maximizes efficiency in agricultural operations.

2. Power Transfer: PTO shafts efficiently transfer power from the tractor’s engine to the agricultural implements. The rotating power generated by the engine is transmitted through the PTO shaft to drive the machinery connected to it. This direct power transfer eliminates the need for separate engines or motors on each implement, reducing equipment costs and maintenance requirements. PTO shafts ensure a reliable power supply, allowing agricultural operations to be carried out efficiently and effectively.

3. Increased Productivity: By utilizing PTO shafts, agricultural operations can be performed more quickly and efficiently than manual or alternative power methods. PTO-driven machinery typically operates at higher speeds and with greater power compared to human-operated or manual tools. This increased productivity allows farmers to complete tasks such as tilling, seeding, harvesting, and material handling more efficiently, reducing labor requirements and increasing overall farm productivity.

4. Time Savings: PTO shafts contribute to time savings in agricultural operations. The ability to connect and disconnect implements quickly using standardized PTO shafts allows farmers to switch between tasks rapidly. This saves time during equipment setup, as well as when transitioning between different operations in the field. Time efficiency is particularly valuable during critical farming periods, such as planting or harvesting, where timely execution is essential for optimal crop yield and quality.

5. Reduced Manual Labor: PTO shafts minimize the need for manual labor in strenuous or repetitive tasks. By harnessing the power of tractors or other prime movers, farmers can mechanize various operations that would otherwise require significant physical effort. Agricultural implements driven by PTO shafts can perform tasks such as plowing, mowing, and baling with minimal human intervention, reducing labor costs and improving overall efficiency.

6. Precision and Consistency: PTO shafts contribute to precision and consistency in agricultural operations. The consistent power supply from the PTO ensures uniform operation and performance of the connected machinery. This helps in achieving consistent seed placement, even spreading of fertilizers or chemicals, and precise cutting or harvesting of crops. Precision and consistency lead to improved crop quality, enhanced yield, and reduced waste, ultimately contributing to the overall efficiency of agricultural operations.

7. Adaptability to Various Terrain: PTO-driven machinery is highly adaptable to various types of terrain encountered in agricultural operations. Tractors equipped with PTO shafts can traverse uneven or challenging terrain, allowing implements to operate effectively on slopes, rough fields, or hilly landscapes. This adaptability ensures that farmers can efficiently manage their land, regardless of topographical challenges, enhancing operational efficiency and productivity.

8. Integration with Automation and Technology: PTO shafts can be integrated with automation and technology advancements in modern agricultural practices. Automation systems, such as precision guidance and control, can be synchronized with PTO-driven machinery to optimize operations and minimize waste. Additionally, advancements in data collection and analysis allow farmers to monitor and optimize machine performance, fuel efficiency, and productivity, further enhancing the efficiency of agricultural operations.

By providing versatility, efficient power transfer, increased productivity, time savings, reduced manual labor, precision, adaptability to terrain, and integration with automation and technology, PTO shafts significantly contribute to enhancing the efficiency of agricultural operations. They enable farmers to perform a wide range of tasks with ease, ultimately improving productivity, reducing costs, and supporting sustainable farming practices.

pto shaft

How do PTO shafts handle variations in speed and torque requirements?

PTO shafts (Power Take-Off shafts) are designed to handle variations in speed and torque requirements between the power source (such as a tractor or engine) and the driven machinery or equipment. They incorporate various mechanisms and components to ensure efficient power transmission while accommodating the different speed and torque demands. Here’s a detailed explanation of how PTO shafts handle variations in speed and torque requirements:

1. Gearbox Systems: PTO shafts often incorporate gearbox systems to match the speed and torque requirements between the power source and the driven machinery. Gearboxes allow for speed reduction or increase and can also change the rotational direction if necessary. By using different gear ratios, PTO shafts can adapt the rotational speed and torque output to suit the specific requirements of the driven equipment. Gearbox systems enable PTO shafts to provide the necessary power and speed compatibility between the power source and the machinery they drive.

2. Shear Bolt Mechanisms: Some PTO shafts, particularly in applications where sudden overloads or shock loads are expected, use shear bolt mechanisms. These mechanisms are designed to protect the driveline components from damage by disconnecting the PTO shaft in case of excessive torque or sudden resistance. Shear bolts are designed to break at a specific torque threshold, ensuring that the PTO shaft separates before the driveline components suffer damage. By incorporating shear bolt mechanisms, PTO shafts can handle variations in torque requirements and provide a safety feature to protect the equipment.

3. Friction Clutches: PTO shafts may incorporate friction clutch systems to enable smooth engagement and disengagement of power transfer. Friction clutches use a disc and pressure plate mechanism to control the transmission of power. Operators can gradually engage or disengage the power transfer by adjusting the pressure on the friction disc. This feature allows for precise control over torque transmission, accommodating variations in torque requirements while minimizing shock loads on the driveline components. Friction clutches are commonly used in applications where smooth power engagement is essential, such as in hydraulic pumps, generators, and industrial mixers.

4. Constant Velocity (CV) Joints: In cases where the driven machinery requires a significant range of movement or articulation, PTO shafts may incorporate Constant Velocity (CV) joints. CV joints allow the PTO shaft to accommodate misalignment and angular variations without affecting power transmission. These joints provide a smooth and constant power transfer even when the driven machinery is at an angle relative to the power source. CV joints are commonly used in applications such as articulated loaders, telescopic handlers, and self-propelled sprayers, where the machinery requires flexibility and a wide range of movement.

5. Telescopic Designs: Some PTO shafts feature telescopic designs that allow for length adjustment. These shafts consist of two or more concentric shafts that slide within each other, providing the ability to extend or retract the PTO shaft as needed. Telescopic designs accommodate variations in the distance between the power source and the driven machinery. By adjusting the length of the PTO shaft, operators can ensure proper power transmission without the risk of the shaft dragging on the ground or being too short to reach the equipment. Telescopic PTO shafts are commonly used in applications where the distance between the power source and the implement varies, such as in front-mounted implements, snow blowers, and self-loading wagons.

By incorporating these mechanisms and designs, PTO shafts can handle variations in speed and torque requirements effectively. They provide the necessary flexibility, safety, and control to ensure efficient power transmission between the power source and the driven machinery. PTO shafts play a critical role in adapting power to meet the specific needs of various equipment and applications.

China Professional CE Certification Agricultural Wide Angle Tractor Factory Supply 6 Spline 540 Pto Drive Shaft for Bush Hog with Yoke Adapter Parts
editor by CX 2024-02-14

China agricultural PTO shaft with Splined shaft tube pto shaft bush hog

Kind: Shafts
Use: agricultural equipment
Model Number: eighteen
CE: certifacation
Guarantee period: 3 yr
Applications: For Tractor,Rotary Cultivator,Planter Equipment ,Farm and and so forth
yokes: forging
edge: Plastic protect can operate generally in between -35 °C to eighty °C
: li.kechina
Quality Control: one hundred% inspection
Features: Successful functionality
Area Hardness: fifty eight-64HRC
Packaging Details: Cartons or pallets
Port: ZheJiang or HangZhou port

Positive aspects / Attributes:
1. Components:
Our organization has bought steel from several large steel groups , this kind of as HangZhou Metal Mill, ZheJiang Bashan Metal Mill, ZheJiang Shrugging Metal Mill whose steel have great mechanical homes and security of chemical component. it keep the shaft to be of high high quality.
two. Manufacture Procession
1st, we have our personal High-precision Digital Machining center for mould making in unique Mould Workshop, exceptional mould make item beautiful physical appearance and its measurement accurately.
The next, we undertake blasting procession, eliminating Oxidation surface, MY1016Z Low cost Price Personalized 12V 250W Electrical Car Brushed DC Motor with pace controller make the surface area to be brilliant and clear and uniform and beautiful.
The 3rd, in heat therapy: We use the Controlled-environment Computerized warmth remedy Furnace,
3. Top quality Management:
The quality control is strictly carried out from buying uncooked resources in warehouse to diverse machining procession and to final packing. one hundred% inspection throughout generation .
four. Production Ability
Single PTO shaft , every month can create 16000 pcs.

pTO drive shaft for distinct brand names of agriculture machinery, these kinds of as tractor Johndeer, case,and newholland

Item	Cross journal measurement		540dak-rpm		1000dak-rpm
Sequence one	22mm	54mm	12KW	16HP	18KW	25HP
Collection 2	23.8mm	sixty one.3mm	15KW	21HP	23KW	31HP
Series 3	27mm	70mm	26KW	35HP	40KW	55HP
Sequence 4	27mm	seventy four.6mm	26KW	35HP	40KW	55HP
Sequence five	thirty.2mm	80mm	35KW	47HP	54KW	74HP
Collection six	30.2mm	92mm	47KW	64HP	74KW	100HP
Series 7	30.2mm	106.5mm	55KW	75HP	87KW	18HP
Series 8	35mm	106.5mm	70KW	95HP	110KW	150HP
Collection 38	38mm	102mm	70KW	95HP	110KW	150HP

Packaging & Shipping and delivery

Organization Information
Goals of Global Sourcing at PAPAYA:Decrease getting chargesEnhance the good qualityMinimize dangers within the provide chainSecure improvements of leading suppliers CZPT

Principal Items: PTOshaft , Transmission shafts for agricultural machinery, vehicle. Engineering machinery machinery transmission shafts, and mower equipment.
Enterprise Kind: Company, 1236 AC Motor Controller 48v for Lifted Golf Cart Import and Exporter
Principal Export Marketplaces: North The us, South The united states, Western Europe, Japanese Europe, Center East and so on.
No. of Workers: a hundred and fifty-250 People
Our business is found in Xihu (West Lake) Dis. Disteict, HangZhou, masking a land spot of twelve.000 m2. The business enjoys a exceptional location and convenient site visitors. Lt is 20km away from downtown HangZhou. And 25km away from Xihu (West Lake) Dis. Airport. The business is a modem business integrating advancement. Design and style, generation. Revenue and services, specializing in manufacturing of ali sorts of transmission shafts for agricultural equipment, car. Engineering machinery equipment transmission shafts, and mower accessories. Lt also has a powerful technological drive with the capacity of independent advancement and production. Products of the company go over new fashion agricultural resources and relevant engineering machinery of all sorts which are strength-saving. Productive and trustworthy in terms of high quality.
The company now has a staff of far more than 200 persons. Such as 6 engineers, MXUS 5K 5000W hub motor 8 senior experts, lt is outfitted with a group with higher-top quality, more than a hundred basic equipments these kinds of as lathes(with electronic contro). Millers, drills, grinders. Planers and borers, in excess of ten special equipments for processing of transmission shafts, including higher-precision encounter tooth processing products from ZheJiang , unique products for ear unexciting, specific device for snap spring grooving, and medium-frequency quenching tools, and inspection equipment, MS90S-2 2.0HP Substantial Efficiency Electric AC motor 2POLE a few-phase asynchronous AC 3 Stage Induction Motor Self-cooling Fan hardness testers, and all kinds of specialized equipments for measuring and actual physical and chemical checks, we have realized specialized and scale production with the annual productivity of more than fifty thousandpieces.

supplier
China agricultural PTO shaft with Splined shaft tube pto shaft bush hog
editor by Cx 2023-07-04

China Hot selling High Quality Agricultural Equipment Dq1104 110HP 4WD Big Wheel Farming Tractor From Tractor Factory Manufacturer bush hog pto shaft

Product Description

High quality Agricultural Equipment DQ1104 110HP 4WD Big wheel Farming tractor from Tractor factory manufacturer

Tractor Main Features and Advantages:

1.Equipped famous brand engine showing advanced capacity,low fuel consumption,high economic efficiency.
2. Streamlined appearance design, beautiful and generous.
3.Transmission Case adopt meshed shift and add the gearbox interlock device makes the operation more smoothly,reliable and easier.
4. Double action clutch with disc spring, perform steadily and easy to operate.
5. Fully hydraulic steering system greatly reduced driver’s work strength.
6. Wet disc brake device, reliable brake performance.
7. Separate injection of hydraulic oil, reliable to operate.
8. The lifter with force and position adjustment, with reliable lift.
9. Tractor PTO:
PTO in Double speed : 540/760r/min Optional, For high working efficiency.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural equipment of all over the world.
10. Big Chassis and Heavy-duty Rear axle for Durable Strong machine.
11. Full series light, ROPS,Sunshade/Canopy, Fan/Heater/Air-conditioned cabin are all available, for more comfortable driving environment.

Tractor Main specificaiton and Technical parameters:

Tractor Model

DQ1104

Drive type

4×4

Engine

Engine type

YTO or CZPT brand, 4 cylinder diesel engine

Capacity of fuel tank(L)

150

Rated speed (r/min)

23

Best price will be quoted for you as soon as receive your Requirement !

Type:	Wheel Tractor
Usage:	Farm Tractor, Garden Tractor, Lawn Tractor
Certification:	ISO, CE, CCC, Pvoc, Coc
Drive Wheel:	4WD
Emission Standard:	Euro III
Fuel:	Gas / Diesel

Customization:	Available \| Customized Request

Shaft Collar

PTO Shaft Safety Chains

PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
Shaft Collar

Safety chains

<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.

Shield

A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
Shaft Collar

IID shaft guard

The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.

Overrunning clutch

An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.

Direction of rotation

Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
China Hot selling High Quality Agricultural Equipment Dq1104 110HP 4WD Big Wheel Farming Tractor From Tractor Factory Manufacturer bush hog pto shaft
editor by CX 2023-06-05

China Good quality CZPT High Quality 12HP Single Cylinder Air-Cooled 4-Stroke Diesel Engine (192F) bush hog pto shaft

Product Description

BISON High Quality 12Hp Single Cylinder Air-Cooled 4-Stroke Diesel Engine (192F)

Product Description

Excellent combustion efficiency to produce high economic benefits. Regulation systems and warning systems, are safe to use.

1. Ultra-low fuel consumption
2. Powerful and powerful
3. Low noise volume
4. A variety of output forms for customers to choose

Product Parameters

HangZhou CZPT INDUSTRY MACHINERY CO., LTD Diesel engine
Model Name	173F	178F	186FA	188F	192F	195F	1100F	1103F
Engine Type	Single-cylinder,vertical,4-stroke air-cooled diesel engine
Bore x Stroke	73X59	78×62	86×72	88×75	92×75	95×75	100×84	103×88
Engine Model	247cc	296cc	418cc	456cc	498cc	531cc	660cc	718cc
Max Output	(5.7HP)4.2kw	(6HP)4.4kw	(9.6HP)7.1kw	(11HP)8kw	(12HP)9kw	(13HP)9.5kw	(14HP)10.5kw	(15HP)11kw
RPM	3600
Fuel Cap/Working Time	2.5 Liters/ 2.5 Hr	3.5 Liters/ 2 Hr	5.5 Liters/ 2 Hr
G./Net weight	30/25kg	36/31kg	55/50kg	55/50kg	56/51kg	56/51kg	65/60kg	65/60kg

Company Profile

BISON Diesel Products

Cooperation Brand

Certifications & Exhibition

Export Case & Good Review

FAQ

Q: Are you a trading company or manufacturer?
A: We are a factory.

Q: How can I get your catalog?
A: Send an inquiry to us and tell us u need our catalog, our sales will reply to u within 6 hours with the catalog.

Q: Can I get a sample to check the quality before mass order?
A: Yes, you can.Welcome to place a sample order to check our quality. I do believe our high-quality products will bring
more orders for you from your clients!

Q: Any guarantee for your products?
A: Our company’s culture is”Quality is our culture!”All of our products with 12 monthly GUARANTEE, never need to
worry about the after-sale service, we will always be here to support your business!

Q: Any certifications for your products?
A: Our products can pass CE, ROHS, Euro 5, and EMC certifications, so they can be sold CZPT safely!

Q: Do u support OEM/ODM service?
A: Yes, we do support, we have an experienced R&D team, so welcome to place OEM/ODM orders to us.

Q: At last, about the payment terms, any convenient and safe way for our buyers?
A: We have PayPal, MIC pay, L/C, T/T payment terms options, do business with us, your money will be safe, your
the business will be safe!

Why Choose BISON?
1. Your One-stop sourcing option! offers a complete range of mechanical products including generators, water pumps, engines and high pressure washers, Light Construction Equipment, Power Tool and more. Can help you reduce time and energy consumption.

2. Better understand what you need, what you care about, not only to provide competitive prices of quality products, OEM services to satisfy yours and strictly control the entire production process to ensure on-time delivery. Super professional service, from pre-sale, sale to after-sales service. We are not only working partners but also friends and family.

3. At present, the company has passed Euro V certification, CE certification and iso9001 management system certification. At the same time, it is a new manufacturing factory that continuously innovates and applies to product manufacturing.

Q: Are you a trading company or manufacturer?
A: We are a factory.

Q: How can I get your catalog?
A: Send an inquiry to us and tell us u need our catalog, our sales will reply to u within 6 hours with the catalog.

Q: Can I get a sample to check the quality before mass order?
A: Yes, you can.Welcome to place sample order to check our quality. I do believe our high-quality products will bring
more orders for you from your clients!

Q: Any guarantee for your products?
A: Our company’s culture is”Quality is our culture!”All of our products with 12 months GUARANTEE, never need to
worry about the after-sale service, we will always be here to support your business!

Q: Any certifications for your products?
A: Our products can pass CE, ROHS, Euro 5, EMC certifications, so they can be sold CZPT safely!

Q: Do u support OEM/ODM service?
A: Yes, we do support, we have an experienced R&D team, so welcome to place OEM/ODM orders to us.

Why Choose BISON?
1. Supply you top quality products with Competitive Prices under the same quality level,
different products according to your different market demands.

2. Strictly Control the whole production process and guarantee punctual delivery, Test each of our products
one by 1 before packing to ensure the quality.

3. Supply you a good pre-sale, in-sale, and after-sale service. We’re not just working partners, but also
Friends and Family.

4. When you come to our Factory, we will try our best to supply you with all services to make you feel
at home.

After-sales Service:	Technical Support, Provide Spare Parts
Warranty:	12 Months
Ignition Mode:	Compression-Ignition
Speed:	High Speed
Cooling Cylinder:	Air-Cooled
Intake Pressure Impulse:	Naturally Aspirated

Customization:	Available \| Customized Request

Shaft Collar

Choosing the Right PTO Shaft For Your Tractor

There are a number of different PTO shaft types available for your tractor. These include the North American, German and Italian styles. They are also available in various series, each with different options for bearing diameter and cap-to-cap overall length. To choose the best shaft for your tractor, it’s important to know what kind of tractor you own and the type of PTO that you need.

IID shaft

When it comes to choosing the best IID shaft for your PTO, the selection process can be a challenge. Whether you are replacing the shaft in your own tractor or need to purchase one for a client, there are several factors to consider. The right PTO shaft for your tractor should be compatible with the equipment you currently use. For instance, a shaft that can be used in a farm tractor will fit a different farm tractor than one used in a construction machine.
First of all, a safety shield is a critical part of your IID shaft. The shielding will help keep the entire shaft free of any potential hazards. Typically, shielding will cover the straight part of the shaft, universal joints, and PTO connection. A shield can also help protect you from injury if you accidentally run into the shaft or touch the guard.
A power take off shaft will be the best choice if you are using a tractor for other applications, such as mowing, shredding, or plowing. A PTO shaft is also a crucial part if you own a large tractor or implement. It will allow you to operate your equipment with maximum efficiency.
An IID shaft is designed to slide into another piece when the tractor’s PTO is engaged. A disconnected IID shaft can pull the two pieces apart and cause the tractor to swing uncontrollably when it is engaged. This can cause serious injuries or even death. You should not engage a PTO if you aren’t certain of its strength.
To ensure the safety of the driveline shield, check for proper alignment of the PTO shaft. If it isn’t aligned properly, foreign materials can enter the shaft bearings. A damaged driveline shield can also lead to driveline separation, particularly when the tractor is making sharp turns or downhills. In addition, improper alignment of the drawbar may damage the protective shield that protects the shaft.
Choosing the right PTO series size requires proper measuring of each part. Measure the length of each yoke outside the PTO shaft and determine the appropriate PTO series size. The PTO yoke size chart can be helpful when choosing the correct size for your tractor.

Reverse PTO

Many different applications call for a reverse PTO shaft. These adapters allow the PTO shaft to be turned in the opposite direction of the engine, matching the rotation of the power take-off to the rotation of the equipment it drives. They can be used to space the power take-off away from the transmission case and improve clearance for a direct-coupled pump or driveshaft.
Reverse PTO shafts are available for CZPT . They are designed for six-spline 540-rpm applications. They also offer the option of multi-speed operation. Reversed PTOs are a great option for implements that can get stuck.
Reverse PTOs can be used on most types of PTO. The reverse version has a gearbox that allows it to rotate backward. These are ideal for implements that can get stuck in a field. A reverse PTO shaft makes it possible to work with the implement without having to wait for it to get unstuck.
When using a PTO, it’s important to know which type of gearbox is needed. If you have an older model, you’ll probably need a reverse PTO shaft. These are generally used on older, vintage tractors with ground drive PTO. The ground speed pTO shafts match the speed of the tractor’s final drive, so when the tractor is in reverse, the gearbox will turn backward. This feature will not function if you’re working stationary, though.
A tractor with a reverse PTO is important for a number of reasons. For example, the reverse PTO can help you turn a stuck tractor in the opposite direction, which is useful when a piece of farm equipment becomes stuck in mud or when you need to push a stuck implement back. In addition, it allows you to use the tractor’s power to operate various implements. The reverse PTO also helps you know how much power is needed to run various implements on various terrain.
In addition to being convenient, reverse PTO shafts also help reduce the risk of damage to implements attached to the PTO. It’s vital to keep a PTO shaft in good working order.
Shaft Collar

Square rigid shaft

When you are looking for a new square rigid PTO shaft, you should consider a few factors. Choosing the right one can be a challenge, as the process is not always simple. For instance, there are a lot of choices when it comes to different brands and interpretations. You can even choose to purchase a square rigid shaft that is not square.
Torsional rigidity is a measure of the ability of a shaft to resist torsional forces. The higher the value of J, the more rigid the shaft will be. For example, a steel shaft has a higher torsional rigidity than an HDPE shaft. The correct value of J can have a big impact on the design decisions.
Another factor to consider is the type of shaft coupling. Rigid shaft couplings are best for shafts that are perfectly aligned. While flexible couplings are flexible enough to accommodate small misalignments, they are not as flexible as the flexible ones. Rigid shaft couplings, which are typically made of metal, are not designed for high-speed rotation.
Rigid couplings are a good choice for a wide range of applications. Rigid couplings are available in many sizes and configurations, and can be used with either a powered or an unsupported shaft. Rigid couplings are also available with keyways to transmit torque.
Torsional rigidity depends on the geometry of the components. A higher torsional rigidity means a shaft is more resilient to twisting. However, excessive twisting can result in unstable performance. As a result, it is important to avoid over-twisting a shaft.
Flange couplings are another option. These couplings have two flanges that are attached to each other with bolts or nuts. They are very similar to split muff couplings and sleeve couplings. The difference is that flange couplings have two flanges – one for the shaft and one for the coupling hub.
If you are thinking about purchasing a square rigid PTO shaft for your tractor, be sure to consider the features that will best serve your specific needs. While you may be considering the price of this new shaft, remember that it is a machine part that could be dangerous.
Shaft Collar

Economy PTO

There are several standard types of PTO shafts. They can vary in diameter and number of splines, and are designed to work with a specific speed range. The following are the main differences between these types. Choosing the right type for your application will depend on its application. One of the most important considerations to make when choosing a PTO shaft is the ratio between the shaft’s diameter and the toothed wheels that are attached to it.
When choosing a PTO shaft, consider the amount of torque you need. In general, an economy PTO shaft should be able to support a maximum load of 540 Nm. In addition, it should be able to handle a high-speed output. An economy PTO shaft may need less torque than a high-performance model.
Economy PTO shafts come in two basic styles: North American and Italian. These two types are designed to provide constant-speed output and balance the power input of a tractor. There are also various other styles of PTO shafts available, including square and rectangular half-shaft assemblies. You can also purchase extra parts to repair a worn PTO shaft.
The control/monitoring unit in a PTO includes a screen display and a manual control for selecting engaged or disengaged PTO states. In addition, there is a switch in the cab mounted control unit 14 that selects normal and economy modes when driving the PTO. These modes utilize different gears to achieve the desired PTO shaft revs.
To select the right PTO speed, select the lever in economy mode and increase the throttle to the appropriate rpm. The PTO speed should be 540 RPM. The control/monitoring unit 14 will use this information to adjust the clutch control parameters. In addition to the PTO speed, it will also display the torque on the PTO shaft.
Economy PTO shafts are ideal for a variety of applications. These PTOs allow the tractor to run at lower rpms, thereby reducing noise and vibrations. They are typically available in both hydraulic and mechanical types.
China Good quality CZPT High Quality 12HP Single Cylinder Air-Cooled 4-Stroke Diesel Engine (192F) bush hog pto shaft
editor by CX 2023-06-01

China manufacturer Malawi Hot Sale Dq1204 120HP 4WD High Quality Cheap Agricultural Wheel Farming Tractor Made in China pto shaft for bush hog

Product Description

Malawi hot sale DQ1204 120HP 4WD High quality cheap Agricultural wheel Farming Tractor Made in China

Tractor Main Features and Advantages:
1.Equipped famous brand engine showing advanced capacity,low fuel consumption,high economic efficiency.
2. Streamlined appearance design, beautiful and generous.
3.Transmission Case adopt meshed shift and add the gearbox interlock device makes the operation more smoothly,reliable and easier.
4. Double action clutch with disc spring, perform steadily and easy to operate.
5. Fully hydraulic steering system greatly reduced driver’s work strength.
6. Wet disc brake device, reliable brake performance.
7. Separate injection of hydraulic oil, reliable to operate.
8. The lifter with force and position adjustment, with reliable lift.
9. Tractor PTO:
PTO in Double speed : 540/760r/min Optional, For high working efficiency.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural equipment of all over the world.
10. Big Chassis and Heavy-duty Rear axle for Durable Strong machine.
11. Full series light, ROPS,Sunshade/Canopy, Fan/Heater/Air-conditioned cabin are all available, for more comfortable driving environment.

Tractor Main specificaiton and Technical parameters:

DQ1204 120HP 4W D Tractor details show :

DQ1204 120HP 4WD have Various Optional configurations and colors for choose:

Advance Manufacutring Line:

Strictly Inspecting and Full Testing for ensuring high quality product:

Tractor Packing and Loading container for Delivering goods :

Please contact us if you have any demand for our product :

Best price will be quoted for you as soon as receive your Requirement !

Type:	Wheel Tractor
Usage:	Farm Tractor, Garden Tractor, Lawn Tractor
Certification:	ISO, CE, CCC, Pvoc, Coc
Drive Wheel:	4WD
Emission Standard:	Euro III
Fuel:	Gas / Diesel

Customization:	Available \| Customized Request

Shaft Collar

What Is a PTO Shaft?

A PTO shaft is a component that is important for a power take-off (PTO) tractor. There are many different kinds of PTOs, including Italian, German, and North American types. The types are categorized into different series, which will have different features such as bearing diameter, cap-to-cap length, and snap rings.

Power Take-Off (PTO) shaft

A PTO shaft is a high-speed working shaft that provides torque and lift. This is an advantage for machines that lift and lower loads and are often used on construction sites. Often, the operating elements are located outside of the operator’s cabin. A safety system is also present that allows the PTO shaft to automatically disengage if it is not turned on.
A safety retaining band 12 is used to secure the PTO shaft. The retaining band extends axially from the PTO shaft S and includes a hinge. The band may be adjustable in width to ensure a correct clearance from the PTO shaft. If necessary, it may also be secured with a conventional over-center clamp.
The power-take-off (PTO) shaft is a crucial part of a tractor. Understanding how power is transferred from the tractor’s engine to the implement requires a better understanding of how this shaft works. The torque and speed of the PTO shaft is essential to developing and utilizing the power of the tractor. There are many ways to measure torque and speed at the PTO shaft, including using a telemetry or encoder system.
A Power Take-Off (PTO) shaft safety retainer is an inexpensive, dependable, and fully effective device that protects the PTO shaft from entanglement. Its effectiveness will become clear after reading the specification. A power take-off shaft safety retainer is not difficult to install and is a good choice for many applications.
PTO shafts have a dangerous tendency to separate from the driven machinery. This poses a safety hazard because the PTO shaft can continue to whip around while the operator is driving the machine. Additionally, it can be very difficult for the operator to reach the power plant when operating PTO-driven equipment.

Safety chain

The safety chain on your PTO shaft is an important component of your tractor’s safety system. A properly guarded PTO can prevent entanglement with people, tools, and objects. Moreover, it reduces the risk of the PTO shaft becoming detached from the tractor. It also prevents people from stepping over the rotating shaft.
When not guarded, a PTO shaft is extremely dangerous. It can cause serious injuries and even death. Proper safety chains can prevent this from happening and protect livestock from damage to the PTO shaft. If you’re looking to purchase a safety chain for your PTO shaft, be sure to get one that fits tightly.
When properly attached, a safety chain can keep the shaft from swinging when the PTO is engaged. A 540-rpm PTO shaft will make more than two complete revolutions in less than five seconds. That means it can wrap someone in five tenths of a second. And if you try to pull away, you’ll get wrapped even tighter!
Another reason to use a safety chain is to prevent injury from clothing getting caught in the drive shaft. A jacket or a sweater can entangle itself around the PTO shaft and cause a serious injury. The clothing can also trap the injured limb against the shaft. Hence, the chain should be removed as soon as possible after the operation is completed.
A safety chain is an essential part of your tractor’s safety system. It prevents an accident from happening because of improper maintenance. A poorly maintained PTO shaft can result in severe injuries or even death. Properly installed and maintained safety chain can help you prevent any kind of PTO shaft accident.
Shaft Collar

Universal joint

A bad universal joint can cause a number of problems for your tractor or implement. These issues may include squeaking or clunking noises when you shift gears, or a shuddering sensation when you brake. If you notice any of these symptoms, it is best to take your vehicle to a mechanic right away for a thorough inspection. If not fixed properly, a bad universal joint can separate from the drive shaft and cause major damage to the tractor or implement.
In order to choose the proper universal joint, you must consider the size of your PTO shaft. Some implements have a diameter of 14 inches or more from the hitch point to the end of the input shaft. The longer distance helps prevent the PTO shaft from bottoming out when making sharp turns. It also prevents the two parts of the shaft from detaching during cornering.
Universal joints are used in agricultural and forestry equipment and other vehicles with large number of rotors. They can be made of different materials. The most common is steel or stainless steel. This material can last for many years. A universal joint is an excellent option for small tractors, lawn mowers, and other agricultural equipment.
The universal joint is also very useful when coupling or extending drive lines. It comes with 2 yokes and a cross kit. The yokes measure 6 x 13/8″ spline, while the cross kit measures 30,2 x 92 mm. The universal joint is made to withstand extreme temperatures. It can be easily disassembled and serviced if necessary.

Square rigid shaft

Torsion is a property of a mechanical system that is affected by changes in torsional rigidity. Torsional rigidity is measured as the torque needed to twist one unit of angular measurement over one unit of length. A shaft with high torsional rigidity will provide a stable mechanical interface.
Different shafts may have different types of collars. The most basic one is a sleeve, which is composed of a thick tube with the same diameter as the shaft. The sleeve is attached to each end of the shaft and has threaded inserts to prevent longitudinal movement.
The PTO shaft also has a safety shield on both ends. It helps to prevent accidents by securing equipment to the tractor. It can be found in domestic and metric shapes. The domestic versions are generally round and domestic shaped, while metric versions are available in a bell, football, star, and metric shape.
An CZPT coupling consists of three pieces: a center plastic disc, two encompassing discs, and a flange. These parts are joined together with a ring that is screwed to the shaft. Some couplings feature oil injection points on the coupling. These can supply oil under pressure to the coupling’s annular grooves. This helps it ‘float’ and aids in the removal.
Another type of flexible coupling is the universal joint. These couplings can be made from a variety of materials, such as rubber, braided metal wire, or woven wire. They can be fabricated to withstand various misalignments. But, unlike rigid couplings, flexible couplings are susceptible to shock and vibration.
Shaft Collar

Economy PTO

Economy PTO shafts are designed to reduce the overall torque and power consumption of a tractor. They can be manually adjusted to engage and disengage the PTO. The cab mounted control/monitoring unit 14 has a switch 19 that selects between the economy and normal driving modes of the PTO. Using the economy mode decreases the engine rpm while using a lower gear ratio to drive the PTO shaft.
Economy PTO shafts come in hydraulic and mechanical versions. Both types are suitable for agricultural tractors. They allow the tractor to operate at a lower rpm, which reduces noise and vibration. They can also be used in a wide range of equipment. The transmission PTO is the oldest type, and is directly connected to the transmission. When the clutch is engaged, it drives the transmission.
Standard PTO shafts are available in various diameters, splines, and speeds. Many implements are designed to be compatible with one or more of these types of PTO shafts. The domestic versions come with a splined front shaft and a square, rectangle, or round secondary shaft.
Another difference between the two types is the number of teeth on the toothed wheel. The economy PTO allows the tractor to run at a lower rpm than the standard PTO. The engine rpm can go as low as 1600 while using the economy PTO. It also helps to reduce noise and vibration in the cab.
The present invention solves these issues and provides an increased level of automation and operator awareness of the PTO function. It also includes a system for detecting the type of PTO shaft and automatically setting the parameters of the control routine.
China manufacturer Malawi Hot Sale Dq1204 120HP 4WD High Quality Cheap Agricultural Wheel Farming Tractor Made in China pto shaft for bush hog
editor by CX 2023-05-23

China SWC Cardan Shaft Used in Industrial Equipment pto shaft for bush hog

Product Description

SWC BF Cardan Shaft(JB/T5513-ninety one)

Cardan shaft is commonly utilised in rolling mill, punch, straightener, crusher, ship travel,paper creating equipment, widespread machinery, water pump products,check bench and other mechanical apps.

♦SWC BF Cardan Shaft Standard Parameter And Primary Dimension(JB/T5513-1991)

_Product	_{Tactical diameter D mm}	_{Nominal torque Tn kN·m}	_{Fatique torque Tf kN·m}	_{Axis rotation β (°)}	_{Extend duration LS mm}	_Lmin	_{Dimensions mm}									_{Rotary inertia kg.m^two}		_{Excess weight kg}
_Product	_{Tactical diameter D mm}	_{Nominal torque Tn kN·m}	_{Fatique torque Tf kN·m}	_{Axis rotation β (°)}	_{Extend duration LS mm}	_Lmin	_D1 js11	_D2 H7	_D3	_Lm	_n-d	_k	_t	_b h9	_g	_Lmin	_{Improve 100mm}	_Lmin	_{Improve 100mm}
_SWC180BF	180	twenty	10	_≤25	100	810	a hundred and fifty five	105	114	110	8-17	seventeen	five	24	7	.267	.0070	80	2.8
_SWC200BF	two hundred	32	16	_≤15	110	860	170	120	127	a hundred thirty five	eight-17	19	5	28	eight	.505	.0130	109	three.six
_SWC225BF	225	forty	20	_≤15	a hundred and forty	920	196	a hundred thirty five	152	one hundred twenty	eight-seventeen	twenty	five	32	9	.788	.5714	138	4.9
_SWC250BF	250	63	31.five	_≤15	a hundred and forty	1035	218	150	168	a hundred and forty	8-19	25	six	forty	12.five	1.445	.5717	196	five.3
_SWC285BF	285	ninety	45	_≤15	one hundred forty	1190	245	170	194	160	eight-21	27	seven	forty	fifteen	two.873	.571	295	6.three
_SWC315BF	315	a hundred twenty five	63	_≤15	140	1315	280	185	219	one hundred eighty	ten-23	32	eight	forty	fifteen	5.094	.795	428	8.
_SWC350BF	350	a hundred and eighty	90	_≤15	a hundred and fifty	1410	310	210	267	194	10-23	35	eight	fifty	16	nine.195	.2219	932	15.
_SWC390BF	390	250	one hundred twenty five	_≤15	one hundred seventy	1590	345	235	267	215	10-25	40	eight	70	18	sixteen.62	.2219	817	15.
_SWC440BF	440	355	a hundred and eighty	_≤15	a hundred ninety	1875	390	255	325	260	sixteen-28	forty two	ten	80	twenty	28.24	.4744	1290	21.seven
_SWC490BF	490	500	250	_≤15	one hundred ninety	1985	435	275	325	270	sixteen-31	47	12	ninety	22.5	46.33	.4744	1631	21.seven
_SWC550BF	550	710	355	_≤15	240	2300	492	320	426	305	16-31	50	twelve	a hundred	22.5	86.98	1.3570	2567	34.
_SWC620BF	620	a thousand	five hundred	_≤15	240	2500	555	380	426	340	sixteen-38	55	twelve	one hundred	25	147.fifty	one.3750	3267	34.

·Discover:1.Tf-Torque permitted by fatigue power under varible load

2.Lmin-Bare minimum duration soon after shortening

3.L-Installation size as essential

♦FAQ
Q 1: Are you buying and selling organization or manufacturer?
A: We are a professional maker specializing in production
various collection of couplings.

Q 2:Can you do OEM?
Indeed, we can. We can do OEM & ODM for all the clients with tailored artworks of PDF or AI format.

Q 3:How long is your supply time?
Generally it is 20-thirty days if the merchandise are not in inventory. It is in accordance to quantity.

Q 4: Do you provide samples ? Is it free of charge or extra ?
Sure, we could offer the sample but not for free of charge.Actually we have a very good price principle, when you make the bulk order then cost of sample will be deducted.

Q 5: How prolonged is your warranty?
A: Our Warranty is 12 month below normal circumstance.

Q 6: What is the MOQ?
A:Usually our MOQ is 1pcs.

Q 7: Do you have inspection methods for coupling ?
A:one hundred% self-inspection just before packing.

Q 8: Can I have a pay a visit to to your manufacturing facility ahead of the buy?
A: Sure,welcome to check out our factory.

Q 9: What is your payment?
A:1) T/T. 2) L/C

♦Items Show

US $50-400
/ Piece
| 1 Piece

(Min. Order)

###

Shipping Cost: Estimated freight per unit.	To be negotiated

###

Standard Or Nonstandard:	Standard
Shaft Hole:	8-24
Torque:	10-30N.M

###

Samples:	US$ 500/Piece 1 Piece(Min.Order) \| Order Sample

###

Customization:	Available \| Customized Request

###

_Model	_{Tactical diameter D mm}	_{Nominal torque Tn kN·m}	_{Fatique torque Tf kN·m}	_{Axis rotation β (°)}	_{Stretch length LS mm}	_Lmin	_Size mm									_{Rotary inertia kg.m²}		_Weight kg
_Model	_{Tactical diameter D mm}	_{Nominal torque Tn kN·m}	_{Fatique torque Tf kN·m}	_{Axis rotation β (°)}	_{Stretch length LS mm}	_Lmin	_D1 js11	_D2 H7	_D3	_Lm	_n-d	_k	_t	_b h9	_g	_Lmin	_{Increase 100mm}	_Lmin	_{Increase 100mm}
_SWC180BF	180	20	10	_≤25	100	810	155	105	114	110	8-17	17	5	24	7	0.267	0.0070	80	2.8
_SWC200BF	200	32	16	_≤15	110	860	170	120	127	135	8-17	19	5	28	8	0.505	0.0130	109	3.6
_SWC225BF	225	40	20	_≤15	140	920	196	135	152	120	8-17	20	5	32	9	0.788	0.0234	138	4.9
_SWC250BF	250	63	31.5	_≤15	140	1035	218	150	168	140	8-19	25	6	40	12.5	1.445	0.0277	196	5.3
_SWC285BF	285	90	45	_≤15	140	1190	245	170	194	160	8-21	27	7	40	15	2.873	0.0510	295	6.3
_SWC315BF	315	125	63	_≤15	140	1315	280	185	219	180	10-23	32	8	40	15	5.094	0.795	428	8.0
_SWC350BF	350	180	90	_≤15	150	1410	310	210	267	194	10-23	35	8	50	16	9.195	0.2219	932	15.0
_SWC390BF	390	250	125	_≤15	170	1590	345	235	267	215	10-25	40	8	70	18	16.62	0.2219	817	15.0
_SWC440BF	440	355	180	_≤15	190	1875	390	255	325	260	16-28	42	10	80	20	28.24	0.4744	1290	21.7
_SWC490BF	490	500	250	_≤15	190	1985	435	275	325	270	16-31	47	12	90	22.5	46.33	0.4744	1631	21.7
_SWC550BF	550	710	355	_≤15	240	2300	492	320	426	305	16-31	50	12	100	22.5	86.98	1.3570	2567	34.0
_SWC620BF	620	1000	500	_≤15	240	2500	555	380	426	340	16-38	55	12	100	25	147.50	1.3750	3267	34.0

US $50-400
/ Piece
| 1 Piece

(Min. Order)

###

Shipping Cost: Estimated freight per unit.	To be negotiated

###

Standard Or Nonstandard:	Standard
Shaft Hole:	8-24
Torque:	10-30N.M

###

Samples:	US$ 500/Piece 1 Piece(Min.Order) \| Order Sample

###

Customization:	Available \| Customized Request

###

_Model	_{Tactical diameter D mm}	_{Nominal torque Tn kN·m}	_{Fatique torque Tf kN·m}	_{Axis rotation β (°)}	_{Stretch length LS mm}	_Lmin	_Size mm									_{Rotary inertia kg.m²}		_Weight kg
_Model	_{Tactical diameter D mm}	_{Nominal torque Tn kN·m}	_{Fatique torque Tf kN·m}	_{Axis rotation β (°)}	_{Stretch length LS mm}	_Lmin	_D1 js11	_D2 H7	_D3	_Lm	_n-d	_k	_t	_b h9	_g	_Lmin	_{Increase 100mm}	_Lmin	_{Increase 100mm}
_SWC180BF	180	20	10	_≤25	100	810	155	105	114	110	8-17	17	5	24	7	0.267	0.0070	80	2.8
_SWC200BF	200	32	16	_≤15	110	860	170	120	127	135	8-17	19	5	28	8	0.505	0.0130	109	3.6
_SWC225BF	225	40	20	_≤15	140	920	196	135	152	120	8-17	20	5	32	9	0.788	0.0234	138	4.9
_SWC250BF	250	63	31.5	_≤15	140	1035	218	150	168	140	8-19	25	6	40	12.5	1.445	0.0277	196	5.3
_SWC285BF	285	90	45	_≤15	140	1190	245	170	194	160	8-21	27	7	40	15	2.873	0.0510	295	6.3
_SWC315BF	315	125	63	_≤15	140	1315	280	185	219	180	10-23	32	8	40	15	5.094	0.795	428	8.0
_SWC350BF	350	180	90	_≤15	150	1410	310	210	267	194	10-23	35	8	50	16	9.195	0.2219	932	15.0
_SWC390BF	390	250	125	_≤15	170	1590	345	235	267	215	10-25	40	8	70	18	16.62	0.2219	817	15.0
_SWC440BF	440	355	180	_≤15	190	1875	390	255	325	260	16-28	42	10	80	20	28.24	0.4744	1290	21.7
_SWC490BF	490	500	250	_≤15	190	1985	435	275	325	270	16-31	47	12	90	22.5	46.33	0.4744	1631	21.7
_SWC550BF	550	710	355	_≤15	240	2300	492	320	426	305	16-31	50	12	100	22.5	86.98	1.3570	2567	34.0
_SWC620BF	620	1000	500	_≤15	240	2500	555	380	426	340	16-38	55	12	100	25	147.50	1.3750	3267	34.0

The Different Parts of a PTO Shaft

Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.

Tractor’s power take-off (PTO) shaft

Shaft Collar A Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.

Types

PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.

Rotation direction

The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.

Safety chain

Shaft Collar One of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.

Shield

Shaft Collar A PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
China SWC Cardan Shaft Used in Industrial Equipment pto shaft for bush hog
editor by czh 2022-12-13

China SWC Light-Duty Type Cardan Shaft/Universal Shaft/Pto Shaft/Drive Shaft with ISO pto shaft for bush hog

Item Description

SWC-I Series-Light-weight-Duty Types Cardan shaft
Designs

Info and Measurement of SWC-I Collection Universal Joint Couplings

1. Notations:
L=Standard length, or compressed length for designs with length compensation
LV=Length compensation
M=Weight
Tn=Nominal torque(Yield torque 50% over Tn)
TF=Fatigue torque, I. E. Permissible torque as determined according to the fatigue strength
Under reversing loads
β=Maximum deflection angle
MI=weight per 100mm tube
two. Millimeters are used as measurement units except where noted
three. Please consult us for customizations regarding length, length compensation and
Flange connections.

Material:	Alloy Steel
Load:	Drive Shaft
Stiffness & Flexibility:	Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy:	IT6-IT9
Axis Shape:	Straight Shaft
Shaft Shape:	Hollow Axis

###

Customization:	Available \| Customized Request

Material:	Alloy Steel
Load:	Drive Shaft
Stiffness & Flexibility:	Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy:	IT6-IT9
Axis Shape:	Straight Shaft
Shaft Shape:	Hollow Axis

###

Customization:	Available \| Customized Request

drive shaft center bearing
China SWC Light-Duty Type Cardan Shaft/Universal Shaft/Pto Shaft/Drive Shaft with ISO pto shaft for bush hog
editor by czh 2022-12-01

China tractor PTO towable type round baler 0870 pto shaft for bush hog

Relevant Industries: Farms, Restaurant, Residence Use, Design works , Foodstuff & Beverage Retailers
Showroom Spot: Mexico, Spain, Chile
Video clip outgoing-inspection: Provided
Machinery Test Report: Offered
Advertising and marketing Sort: Common Item
Warranty of main elements: 1 12 months
Main Elements: Gearbox, Motor, Pump
Type: Spherical Baler
Situation: New
Application: pasture, wheat, rice straw
Dimension(L*W*H):
e-mail: vivisunco AT foxmail.com
Neighborhood Services Location: Chile
Soon after-revenue Support Presented: Free spare parts
Packaging Specifics: IRON CRATE PACKING
Port: HangZhou

Round BalerThe 70 Collection Spherical Baler can routinely total the choosing and baling of pasture, rice, wheat and kneaded corn stalks. It has the characteristics of clear pickup, adjustable bale density, high work performance and strong applicability.
The finding system picks up the straws through the elastic claw and sends them to the feeding inlet. Soon after the straws enters the rolling chamber, the rolling drums drive the straws to rotate to sort a round bale main, which varieties a restricted spherical bale from little to massive. The 70 Collection Spherical Baler adopts double-binding mechanism, which reduces the binding time and ensures the large perform efficiency.

Design	0571
Matching Tractor	twenty five~50hp
Bale Size (Dia. Width)	∮61*70 cm
Packing width	80 cm
Rated PTO speed	540 rpm
Going for walks pace	2~5 km/h
Category of 3-level Linkage	Cat. 1
Weight	440kg

Major Attributes1.3 stage linkage, effortless to elevate and go from 1 location to an additional place2.Large efficiency, make the picking and bundling up at 1 time.3.buzzer warning following 1 bale finished,bale density adjustable.4.normal hemp twine, harmless to animal.5.Every single bale weights about 25kg,a single hour can bale about 80-a hundred and twenty bales.6.Our baler can use tractor hydraulic program or hydraulic pump on alone, these are optional.
Certifications In depth Photographs Machine ElementsIdentify: Finding Mechanish
Coloration zinc coated, reliable elastic claw. The selecting mechanism can easily choose up the straws by means of the elastic claw and sends them to the feeding inlet.Major CharacteristicsIdentify: Baling chamber and system
The chamber is totally in round form. Strong chains and rollers guarantee the trustworthy efficiency of the baling mechanism. Shear bolts and slip clutch supply an overload defense. Device ElementsTitle: Binding and Hydraulic Technique
Double binding program decreases the binding time and assures a higher work effectiveness.Self-contained hydraulic program, can be utilized by tractors with no hydraulics.Major FeaturesName: Bale Condition
Dependable baling, binding and hydraulic system assure a perfect bale dimension, density and excelent bale condition. Substantial strength, bold, thick chain.
After specially taken care of sprocket not simple to use, not straightforward to slip.
steel board make stronger rollers. Every single element is personal manufacturing ,no welding, large density, great quality and not easily broken, more secure.
Completely automated hydraulic valve, after baling system finish bundling bale,you can use a switch manage to elevate the back again protect, release bale, very practical and effective.
Computerized baling system, when drum total of grass, round baler will alarm, you just require to end the tractor, baling machine will automatically be baling, simple and convenient.
Our Support Pre-Revenue Provider* Inquiry and consulting help.
* Sample tests support.
* Look at our Factory.
Right after-Sales Services* Education how to instal the machine, training how to use the device.
* Engineers accessible to provider equipment overseas.
Packing & Supply

Packaging
Dimensions	one hundred thirty(L) 125 (W) 125 (D)
Excess weight	440kg
Packaging Particulars	The regular bundle is wood box(Dimensions: LWH). Iron crate packing lined by plasticTwo iron crates stacked together

Packaging
Dimension	Container Loading Images
Fat
Packaging Information	Loading potential: sixteen Sets/ twenty Ft Contianer36 Sets/ 40 Ft Container

Connected Goods Products Identify with urlninety one.8% Response Fee
Merchandise Title with website linkninety one.8% Response Price
Merchandise Identify with website link91.8% Response Price

carbon fiber drive shaft
China tractor PTO towable type round baler 0870 pto shaft for bush hog
editor by czh

Materlal and Surface Treatment
Cross shaft	Heat treatment of 20Cr2Ni4A forging
Bearing cup	20CrMOTi forging heat treatment
Flange fork	ZG35CrMo, steel casting
Spline shaft	42GrMo forging heat treatment
Spline bushing	35CrM0 forging heat treatment
Sleeve body	42CrMo forging
Surface treatment:	spraying
Flat key, positioning ring	42GrMo forging