Product Description
The controllable propeller can be configured into various forms such as single-engine single-propeller, twin-engine double-propeller and twin-engine parallel car according to the type of shafting. The product has high reliability and structure through hydrodynamic calculation, structural design analysis, and material optimization. Simple and easy to maintain. In addition, the controllable propeller system can be configured with multiple types of PTO through the transmission device to drive 1 or more loads (shaft generators, etc.) to meet the supporting requirements of different ship types and functions.
The characteristics of the company’s controllable propeller products:
1. Tailor-made design: Since each ship search has a different line type, our engineers based on the latest hydrodynamic theory and calculation method of tank test results, design the most matching propeller for each ship according to the actual wake field , To ensure the best propeller efficiency while minimizing vibration and noise.
2. Serialization: Use finite element design tools to analyze and optimize the blade and hub mechanism. Three series of controllable propeller hubs have been developed and designed to meet different ship types, and the maximum diameter of the hub can reach 2 meters.
3. Low pressure stability: Through continuous optimization and improvement of the structure of the controllable pitch propeller, the controllable pitch propeller system produces a lower working oil pressure, which improves the stability and reliability of the blades when adjusting the pitch.
4. Convenient integration: The PLC-based controllable propeller control system has high flexibility and redundancy, and improves convenient visualization and system settings. Users can choose the joystick/DP system according to their needs.
5. The geometry of the blade section: Cooperate with Marin to optimize it, which can effectively reduce cavitation and improve propulsion efficiency.
6. OD box (oil distributor): installed at the front end of the gear box for easy installation, testing and maintenance.
7. Unique security design: In the event of a hydraulic failure, the pitch can be locked in the original position in both the reverse and CZPT positions.
8. Realize the integration of CPP and gearbox hydraulic system: save installation space and reduce installation cost.
Company Profile
HangZhou LionHeart Power Equipment Co., Ltd., a subsidiary of 1 of the nation’s top marine services company —- HangZhou Agricultural Machinery Co., Ltd., is a provider of marine equipment worldwide. Our company is committed to providing the best solution to our customer’s project since 1996. With over 20 years of profound experience in the marine services industry, our company has set up a professional and customer-friendly system in our every pre-sales, shipping and after-sales process to ensure your worry-free shopping experience. We ship our brand-new products all over the world, at the best prices on the Web.
LionHeart Power is a professional provider for equipment like marine engines, generators, gearboxes, propellers, marine interior fit-out, deck machinery and related marine spare parts. Our processes and procedures are designed to present the perfect product that will meet or exceed the expectations of every 1 of our customers. We back up that commitment with comprehensive services through the product’s whole life cycle, along with our key technologies and leading product expertise. That is the reason why we stand out as the nation’s marine equipment sales champion of multiple brands for over 10 consecutive years.
LionHeart Power carries 1 of the nation’s largest inventories of marine equipment and related parts from 20+ manufacturers such as Weichai, HangZhou Advance, Deutz, Steyr, Zichai, CZPT and more, among which the CZPT and ADVANCE series are fully covered. Specifically, that inventory is meticulously organized over 57 acres outside and 118, 000 sq. FT. Of warehouse under roof. That means our products are generally in stock for immediate availability. Besides, we are proud of our resource plHangZhou system of products, which is unparalleled in the industry, offering you the shortest lead time and efficient service.
LionHeart Power’s staff is expertly trained not only to quickly locate the products you’re looking for, but also to meet your project requirements with the best solution. If what you are looking for is not ‘on the shelf’, we will customize it for you. This strength builds CZPT our CZPT partnership with various manufacturers and production institutes. Efficiency and service are the goals of every member of our organization. LionHeart Power knows your time is valuable and we produce this value for you. Quality equipment and expertly-trained service technicians, combined with our extensive inventory, give you the edge in your commercial and industrial success.
Quality is our culture all the engines will be tested before leaving the factory We are proud to say that in our years of international trading experience. we never had a single order returned to us, For all our clients, you will receive exactly what you ordered, and you will receive it on time and we live by the principle that customer comes first
Certifications
Packaging & Shipping
FAQ
1.Processing
Orders are usually packed and ready to ship in 1 to 3 business days if the products are in stock. However shipments are subiect to required manufacturing time and customs clearance procedures. which can cause delays beyond original delivery estimates. For detailed delivery information, please contact customer service.
2.Packing Methods
Normally we use wooden boxes for packaging or we can pack it according to your special needs.
3.Shipping Methods
We are happy to offer a variety of shipping methods. Shipping methods available: EXW. FOB.CER. CIF.
4. International Returns & Exchanges
Unfortunately we can’t accept retums on intemational orders. We will test each product before dellverv One-year manufacturer warranty is quaranteed on our complete machines and 3 months on spare parts. I1 you have any concerns with your order, please reach out to customer service
5.Payment Methods
We sugqest 50/50 T/T payment method: 50 percent down payment on placement of the order, with the remaining 50% due CZPT shipment. We also accept L/C, Trade Assurance, Visa transfer and Paypal
| After-sales Service: | 24 Hours Online |
|---|---|
| Warranty: | One Year |
| Material: | Bronze, Copper, Aluminium, Steel, etc. |
| Blades: | 5 |
| Certification: | RoHS, ISO9001:2000, CE |
| Certificate: | CCS |
Power Take-Off (PTO) Shafts
Power take-off (PTO) shafts are used on many types of machines, including jet aircraft. They are typically semi-permanently mounted to a marine or industrial engine, and are powered by a drive shaft. The drive shaft also powers secondary implements and accessories. Depending on the application, accessory drives may also be used in aircraft. There are four main types of PTO units used in jet aircraft.
Power take-off (PTO) shaft
The power take-off (PTO) shaft of a tractor can be controlled to operate in one of two modes: automatic and manual. Automatic mode operates when the PTO shaft starts turning and is automatically engaged when the power lift is raised by actuating the lift lever 9. Manual mode operates when the lift lever is not raised.
The manual mode allows for manual adjustments. A retaining band 12 may be adjusted arcuately about PTO shaft S with an axial center parallel to the axis of the PTO shaft S. The retaining band may be secured by conventional over center clamps. The retaining band 12 may also be adjusted arcuately about pin or bolt 30.
Power take-off (PTO) shaft safety retainers are used to prevent unintended disconnection of the PTO shaft. The safety retainers comprise a stationary openable band that circumscribes the PTO shaft near the connection with driven machinery. The band is preferably offset from the axis of the PTO shaft.
While the PTO shaft is a convenient way to transfer mechanical power to farm implements, there are several inherent hazards associated with using it improperly. Accidental disconnections of the PTO shaft pose a significant risk for the operator. A disconnect can cause the PTO shaft to whip around the driven machinery, potentially causing injury.
Power take-off shaft entanglements can be devastating to the limbs trapped in them, requiring amputation in some cases. In addition to being dangerous, the PTO shafts must be fully guarded to prevent contact with the ground. A farmer must never get too close to an operating PTO shaft to protect their own safety.
Types
There are several different types of PTO shafts available to suit various applications. They can vary in size and number of splines. Each standard has a specific speed range and is designed to fit a variety of implements. For example, there are German and Italian types of PTO shafts.
The type of PTO shaft you choose will determine the maximum load that can be safely transferred. Depending on the type, the rate at which the PTO clutch engages will be different. For example, a lower-density PTO shaft will engage at a slower rate than a higher-density PTO shaft, while a higher-density shaft will be more tolerant of higher loads.
The primary function of a PTO shaft is to secure equipment to the tractor or other agricultural equipment. These parts often feature safety shields on both ends. They are also made in the same shape as the secondary shaft. The front shaft is wider than the secondary shaft, which allows the secondary shaft to fit inside. However, during movement, pieces of the PTO shaft can collapse, making them less safe.
PTO shafts are expensive and easy to steal, so make sure to protect your investment. Make sure the PTO shaft has guards to protect it from thieves. There are two types of PTO shafts: the external and the internal PTO yokes. Internal PTO shafts have an internal PTO yoke, while external PTO shafts use a universal joint. There is also a safety chain and shield on the external PTO shaft.
Depending on the application, you can choose between several different kinds of PTO shafts. Some types of PTO shafts have multiple splines, which can increase the torque transmitted. For applications requiring accuracy and precision, you may want to use a parallel keyed shaft.
Connections
A PTO shaft has two parts: an input and an output. The input portion of a PTO adapter shaft has a smaller diameter, and the output portion has a larger diameter. Both are connected by splines. These splines have tapered outer ends. The first bore 25 has a first frustoconical wall, while the second bore has a second frustoconical wall.
One of the most common causes of PTO shaft failure is a poorly adjusted clutch. Another common cause is improper lubrication of the PTO shaft’s wide angle joints. PTO shafts should be lubricated at least once every eight hours. If you fail to do this, you risk premature ware and reduced life expectancy.
When a PTO shaft is installed in a tractor, the tractor must be connected to the implement using a coupler frame. The coupler frame has a PTO adapter mounting flange that engages with the PTO stub shaft. The coupler frame can move to accommodate the PTO adapter shaft, and the PTO adapter shaft can pivot and slide with the coupler frame.
When a PTO shaft fails, it can result in damage to the tractor and implement. Identifying the cause will help you fix the problem. Constant compression of the PTO shaft can damage the connecting shafts and connections. This could damage the tractor or implement, resulting in expensive repairs. When this happens, it is important to cut or shorten the shaft to reduce the risk of damage.
PTO shaft 24 extends rearward from tractor 10 and is connected to the front universal joint 28 and first end of variable-length splined drive shaft 32. The shaft is connected to a drive mechanism 36 on a mobile work implement 34. This drive mechanism may be mechanical, hydraulic, or a combination of both.
Safety
It is very important for every person using a tractor to understand the safety of PTO shafts. PTOs can be extremely dangerous, and without the correct shielding, they can cause serious injury. It can also be very dangerous if someone accidentally steps on or falls on one while the machine is operating. This is why it is important for everyone using a tractor to read the manufacturer’s manual and follow the safety guidelines for PTO shafts. Moreover, PTOs must only be used for the purpose intended.
PTO safety should be the number one priority for every operator. A small child was tragically killed when he became entangled with a spinning PTO shaft. His father tried to pull him out of the shaft, but was unable to do so. His clothing, which was near the spinning shaft, caught on the PTO and dragged him into it. His body was thrown around the shaft several times, and he sustained injuries to his leg, right arm, and head.
The PTO shaft is an important part of a tractor, and is used to secure the equipment. It is usually secured by safety shields on both ends. There are several kinds of safety shields. One type is a shield that is attached to the front of the PTO shaft. Another type is a shield that rotates freely on its bearings.
Power takeoffs are common on most small and compact tractors, construction machinery, and other equipment. They rotate to provide the drive for the equipment. However, the PTO shaft is very dangerous because it can easily catch something that gets too close to it. Moreover, loose items can also get tangled around the PTO shaft.
Maintenance
One of the most important things to do in order to keep your PTO shaft in top condition is to keep it properly greased. This can be done by using a grease gun or a hand pump. It is important to keep the grease fresh and apply it in the appropriate amounts depending on how much you use the PTO. It is also important to separate the primary and secondary shafts and remove any debris from them.
It is also important to check the spline threads on your PTO on a periodic basis. This is important because some signs of dry shafts are not always immediately apparent. Similarly, spline threading and corrosion can occur behind the scenes and go undetected. Proper PTO maintenance is a vital part of safe and efficient operation.
A damaged or worn drive shaft will prevent your car from turning freely, leaving you exposed to higher repair bills. In addition, it will drastically affect the performance of your car. A broken drive shaft can even result in a crash. You should take your vehicle to a mechanic as soon as you notice any of these problems.
Fortunately, most PTO-driven equipment is equipped with a shear pin to prevent collisions and prevent damage to the gearbox and shaft. It should also be replaced regularly to prevent excessive wear. Long bolts pose a risk of entanglement and can easily catch clothing or gloves. For safety reasons, it is important to disengage the PTO when not in use.
Another thing to do is to keep the PTO shields clean. They must be regularly rotated and tested. Always ensure that your drawbar is properly configured for your machine. This prevents stressing or separating the driveline.
editor by CX 2023-05-16
China supplier ND Heat Treated Ratio Transmission Spare Parts From Rotary Cutter (B140) pto shaft adapter tractor supply
Product Description
|
Item No.: |
B140, Cast Iron Slasher Gearbox |
|
Ratio and Shaft: |
OEM acceptable |
|
Key word |
Agricultural Machinery Gearbox |
Company Profile
In 2571, HangZhou CZPT Machinery Co.,ltd was established by Ms. Iris and her 2 partners(Mr. Tian and Mr. Yang) in HangZhou City, ZHangZhoug province, China, all 3 Founders are engineers who have more than averaged 30 years of experience.
We, CZPT machinery established a complete quality management system and sales service network to provide clients with high-quality products and satisfactory service. Our products are sold in 36 countries and regions in the world, our main market is the European market.
Factory & Workshop
Professional
30 years experience engineman. R&D office, Test laboratory, CNC lathe workshop operated by professionals.
Responsible
2~10years warranty. Attitude determines everything, details determine success or failure. We are responsible for your products.
Scientific management
100% tested. Strict company system and scientific material management will reduce the error rate.
Certifications
We’re working on research and manufacturing all kinds of gearbox reducer and mechanical parts these 11 years, and have obtained certificates including ISO9001, many Gearbox Patents, SGS, BV, etc.
Sample Room
Through our CZPT brand ND, CZPT Machinery delivers agricultural solutions to agriculture machinery manufacturer and distributors CZPT through a full line of spiral bevel / straight bevel / spur gearboxes, drive shafts, sheet metal, hydraulic cylinder, motors, tyre, worm gearboxes, worm operators etc. Products can be customized as request.
FAQ
Q: Are you trading company or manufacturer ?
A: We are exactly a factory.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance, balance before shippment.
Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.
If you have another question, please feel free to contact us.
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| Type: | Gearbox |
|---|---|
| Usage: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Slasher, Rotary Cutter, etc |
| Material: | Iron |
| Samples: |
US$ 200/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
PTO Shaft Safety Chains
PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
Safety chains
<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.
Shield
A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
IID shaft guard
The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.
Overrunning clutch
An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.
Direction of rotation
Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
editor by CX 2023-05-15
China Agricultural machinery parts Agriculture Tube Spline Kubota Tractor Truck Rotary Shaft Adapter Pto Drive Shaft With Clutch Yoke pto shaft cover parts
Condition: New
Guarantee: 1.5 years
Applicable Industries: Production Plant, Machinery Restore Stores, Food & Beverage Manufacturing unit, Farms, Restaurant, Home Use, Foods Store, Printing Retailers, Design functions, Vitality & Mining, Meals & Beverage Outlets
Excess weight (KG): ten KG
Showroom Area: None
Movie outgoing-inspection: Provided
Machinery Check Report: Supplied
Advertising and marketing Sort: Scorching Solution 2019
Type: Shafts
Use: Tractors
Item name: PTO Push Shafts
Software: put up gap digger /mower/tractor
Certification: ISO9001:2008
Bundle: Wooden Carton
Color: Prerequisite
Material: Metal
Following Guarantee Support: Online video technical assist
Packaging Information: Wooden Scenario
Port: ZheJiang / HangZhou
PTO Travel Shafts
one. Tubes or PipesWe’ve previously obtained Triangular profile tube and Lemon profile tube for all the sequence we give.And we have some star tube, splined tube and other profile tubes necessary by our consumers (for a specified series). (Make sure you discover that our catalog doesnt have all the products we produce)If you want tubes other than triangular or lemon, F Collection Metal QD Bushing taper lock for Pumps remember to supply drawings or pictures.2.Finish yokesWe have got many types of rapid launch yokes and basic bore yoke. I will propose the usual variety for your reference.You can also send drawings or photographs to us if you can not find your merchandise in our catalog.three. Basic safety products or clutchesI will connect the details of basic safety gadgets for your reference. We’ve previously have Totally free wheel (RA), Ratchet torque limiter(SA),Shear bolt torque limiter(SB), 3types of friction torque limiter (FF,FFS,FCS) and overrunning couplers(adapters) (FAS).4.For any other far more unique needs with plastic guard, connection method, coloration of portray, bundle, and so on., make sure you really feel free to allow me know.Attributes: 1. We have been specialised in creating, 110J12220-360 3 stage 1.2deg stepper motor nema42 CNC stage motor sewing machine milling device production push shaft, steering coupler shaft, universal joints, which have exported to the Usa, Europe, Australia and so forth for many years 2. Software to all types of common mechanical circumstance 3. Our merchandise are of higher intensity and rigidity. 4. Warmth resistant & Acid resistant 5. OEM orders are welcomed
| Click Right here for more particulars! | ||||||||
CNC Enamel Machine
CNC Lathe Workshop
Figuring Heart
CNC Workshop
Warmth Remedy Device
3D Measurement Machinery
Gear Tooth Profile Test Machines
Content availableMinimal carbon metal, C45, 20CrMnTi, 42CrMo, 6V 12V 24VDC micro linear actuator controller remote telescopic linear actuator actuator linear 12V 24V electrical bed motor 40Cr, stainless steel. Can be adapted relating to buyer requirements.
Area therapyBlacking, galvanization, chroming, electrophoresis, coloration painting, …
Warmth remedyHigh frequency quenching warmth treatment, hardened enamel, carbonizing, China Company Cnc Hollow Shaft Watertight .67A Twin Shaft Stepper Motor,Mini Nema 8 Hybrid Stepper Motor nitride, …
Certifications Packing & Shipping and delivery
drive shaft equipment
editor by czh 2023-02-18
China Pto Adapter Front Drive Shaft Tractor Power Take off Agricultural Transmission Manufacturing Heavy-Duty Farm Steering Industries Best Telescopic Cross Joints with Hot selling
Solution Description
PTO Adapter Front Generate Shaft Tractor Energy Get off Agricultural Transmission Producing Weighty-Obligation Farm Steering Industries Best Telescopic Cross Joints
pto adapter
A electrical power take-off or power takeoff (PTO) is any of numerous approaches for taking power from a energy supply, these kinds of as a operating engine, and transmitting it to an software this sort of as an connected put into action or independent devices.
The 2 speeds most typically utilised with tractor PTO shafts is 540 and one thousand rpm and the PTO shafts can occur in distinct dimensions and lengths. PTO Shaft, Collection 4, 1-3/8 In.
|
US $10-99 / Piece | |
100 Pieces (Min. Order) |
###
| Material: | Carbon Steel |
|---|---|
| Load: | Drive Shaft |
| Stiffness & Flexibility: | Stiffness / Rigid Axle |
| Journal Diameter Dimensional Accuracy: | IT6-IT9 |
| Axis Shape: | Straight Shaft |
| Shaft Shape: | Real Axis |
###
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) |
|---|
|
US $10-99 / Piece | |
100 Pieces (Min. Order) |
###
| Material: | Carbon Steel |
|---|---|
| Load: | Drive Shaft |
| Stiffness & Flexibility: | Stiffness / Rigid Axle |
| Journal Diameter Dimensional Accuracy: | IT6-IT9 |
| Axis Shape: | Straight Shaft |
| Shaft Shape: | Real Axis |
###
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) |
|---|
PTO Shafts and PTO Shaft Shields
When choosing a PTO shaft, measuring the various pieces is an important aspect. Each piece must be measured in a specific way, with the shaft in a closed position. Measure the length between the outsides of the yokes. The closed length will help you determine the correct PTO series size for the horsepower of your tractor.
540 rpm
A 540 RPM PTO Shaft will fit CZPT PTO models. These shafts are slightly indexed to allow for easy PTO drive hookups. These shafts will also work with 1000 RPM implements. They also feature a snap ring that will allow for quick and easy removal.
PTO shafts are commonly divided into two types: 1000 RPM and 540 RPM. The 540 RPM PTO shafts are smaller, with only six splines, while the 1000 RPM PTO shafts are larger. The 540 RPM version is used with implements that require less horsepower and are made for light-duty use.
The PTO shaft transfers power from the tractor’s engine to a PTO-driven implement. When operating at its recommended speed, the PTO shaft rotates at 540 rpm (9 times per second). The higher speed PTO shafts have more splines.
Safety chains
Safety chains for PTO shafts are an important safety feature to consider when operating a tractor. These chains are welded to the drive end of a tractor or implement. They are used to prevent the plastic shield from spinning on the PTO shaft. The chain’s reaction time is slower than the speed of the PTO shaft, which makes it important for safety.
When operating a tractor, it is important to follow the manufacturer’s instructions and keep the machine and equipment in a safe location. A poorly-guarded PTO can entrap ground personnel or cause a serious accident. Operator awareness is also important. It is important to avoid stepping over a revolving shaft, wearing loose clothing, or making repairs while the tractor is running. It is also important to follow the manufacturer’s instructions and use the PTO for its intended purpose.
The safety chains for PTO shafts must be properly connected and fully functional before each use. During a PTO operation, the PTO shaft may rotate as much as 1000 rpm, which is potentially deadly. In addition to safety chains, the tractor should have a clutch or torque limiter fitted on the implement end.
The PTO shaft must have a correct length for the machine. If it is a sliding metal PTO drive shaft, it is important to lubricate it according to manufacturer’s specifications. Lubrication is recommended after every eight hours of operation. Also, make sure that the button on the end of the PTO shaft moves freely. Hammering it into place can damage the guard and the shaft.
A PTO driveline hazard is one of the oldest farm machinery hazards. It refers to the PTO or Implement Input Connection. There are often protruding pins and bolts on the driveline, which can snag clothing.
Shield
The PTO shaft shield is a protective piece that encloses a PTO shaft. These shields are usually plastic, but some are also made of metal. They are made to protect the PTO shaft from debris, which can cause premature wear and damage to the universal joints. A PTO shaft shield is not a permanent fixture, but can be easily removed for replacement or repair.
The PTO shaft shield should be checked periodically to ensure that it is in good condition. It should have no loose ends or loose bolts. Ensure that the shear bolts and pins are the right length and hardness for the PTO shaft. Additionally, the operator should wear snug clothing to avoid stepping on the PTO shaft while working.
The PTO shaft shield should fit snugly over the PTO shaft. If the PTO shaft is loose, it may be difficult to attach the safety shield. However, with a proper PTO shaft shield, the process should be quick and easy. A CZPT safety clip allows easy removal and prevents co-rotation between the inner driveshaft and the safety shield. The driveline safety shield from RPM Transmissions is made of CZPT, which is a rigid and durable material.
In addition, some machine drive shafts are lacking a shield. This can cause a safety hazard. Without a PTO shaft shield, an operator may accidentally touch the shaft and get injured. These guards prevent this danger by enclosing the shaft in a plastic or metal guard.
The PTO shaft shield is a crucial part of tractor safety. It helps protect the operator from accidental entanglement while operating the tractor. When the PTO shaft stub becomes separated, it can cause severe injuries and even fatalities. Thankfully, the industry has made tremendous progress in reducing the risks associated with PTO mishaps. Operators must make sure they maintain the shields and do not remove them if not in use.
Reverse rotation
The PTO shaft reverse rotation mechanism prevents the main drive shaft from moving in a direction opposite to the direction of rotation of the driven shaft. The mechanism is compact, reducing the length of the rotation shaft. The mechanism includes two reversing members: first reversing member 151 rotates in a clockwise direction and second reversing member 153 rotates in a counterclockwise direction.
In a PTO shaft reverse rotation mechanism, a driven shaft is inserted into a hollow cylindrical body. It is rotatably positioned relative to the main driving shaft 112 and radially symmetrically around it. As a result, the driving and reverse-rotation mechanisms are symmetric.
One such PTO shaft reverse rotation mechanism has a main drive shaft and a driven shaft, and a plurality of transmission units coupled to it. The driven shaft and the transmission member rotate in tandem. The transmission units are arranged radially about the main driving member and the driven shaft. Alternatively, one of the reversing units may comprise the second reversing member and the first driving member.
editor by czh 2023-01-25
China CE Approved Tractor Pto Driven Wood Chipper with Competitive Price Mobile Wood Chipper Running in Malaysia pto shaft adapter
Product Description
Factory offer greatest value new situation wood chipper manufactured in china
BX215,BX216,BX217,BX218,BX2113 Drum wood chipper are the primary products in our factory.they are experienced and ideal seller.it can make concluded wood chips twenty-30mm . This drum wooden chipper widely employed in the raw materials getting ready process in the factories of flakeboard, fiberboard, papermaking and wooden chips making plant. Little drum variety wooden chipper is the best equipment for factory’s laboratory preparing content.
Raw materials for Drum sort wooden chipper slicing is primarily modest trail wood, lumbering remainds ( such as branches, twigs, tress pallets etc) and woodworking remainds ( this sort of as slab, plank, log core, squander veneer etc). It also can be utilised to chip non-lignin raw substance (such as flax pole, bulrush, bamboo and so on)
Images :
BX216 wooden chipper specialized parameters:
| Product | BX216 |
| FEED Dimension(MM) | 230*500 |
| QTY OF FLY KNIVES(PCS) | 2 |
| Velocity OF KNIVES Running(R/M) | 590 |
| MAX DIAMETER FEEDER(MM) | 230 |
| Wooden CHIPS Dimension Concluded(MM) | 30 |
| Ability(T/H) | 7-eight |
| Primary Electricity(KW) | fifty five |
| FEEDER Electricity(KW) | 3-four |
| OIL PUMP Electrical power(KW) | 1.five |
| Machine Dimension(MM) | 1800*1900*1210 |
| Bodyweight(KG) | 4070 |
Materials and output chips details :
Creation processing :
Our workshop demonstrates :
We guarantee:
1.wood chipper completely machine,every important parts we produced by cnc milling equipment,preserve confident the precision.
2.primary shaft created by specific treatment options,lengthier life span.
three.every device generate based mostly on European common.
Every machine ,prior to the delivery ,we working in our manufacturing facility with the clients essential resources ,make certain all the machine operating effectively right after arrived to consumers crops .If need to have ,we also can deliver engineer to install and tests machine to clientele plants .
We promise:
1.wooden chipper fully machine,every single key components we created by cnc milling equipment,preserve positive the precision.
2.principal shaft produced by unique therapies,longer life time.
three.each equipment make based on European common.
Every single equipment ,just before the delivery ,we operating in our manufacturing facility with the customers required supplies ,make certain all the equipment running well right after arrived to clientele vegetation .If want ,we also can deliver engineer to put in and tests equipment to clientele crops
Wood chips :
And also we have other types for drum wooden chipper ,you should verify the tech info ,if there any iterms you favor ,remember to totally free to give me inquiry .
| Model | BX-216 | BX-218 | BX-2113 | BX-2113D | BX-2116 |
| Primary motor kw | fifty five | a hundred and ten | 220 | 250 | 710 |
| Knife Qty | 2 | two | 3 | 4 | four*two |
| Feeder opener mm | 540×260 | 680×300 | 700×400 | 700×510 | 1250×650 |
| Max. Feeding diameter mm | 230 | 260 | 350 | 450 | 600 |
| Chips dimensions mm | 25-30mm | twenty five-30mm | twenty five-30mm | 25-30mm | twenty five-30mm |
| Capability T/h | 6-8 | 8-15 | twenty five-thirty | 35-40 | 80-ninety |
| All round measurement mm | 3100×2000 x1500 |
3500×2180 x1800 |
3680×2450 X2050 |
5100×2700 X2300 |
5120x3040x 2330 |
| Weight kg | 4680 | 9100 | 11800 | 14000 | 33000 |
| Feeding conveyor | 6000×550 | 6000×700 | 8000×720 | 8000×720 | 10000×1200 |
| Outlet conveyor | 10000×600 | 10000×800 | 10000×800 | 10000×800 | 10000×1200 |
FAQ:
one.Exactly where is your manufacturing unit?
We loacated in HangZhou metropolis,ZheJiang province, CHINA ,you can fly to HangZhou internation airport.from Airport to manufacturing unit require 40minutes by vehicle.
two.About payment?
We settle for T/T,LC,Wester Union,MoneyGram.
three.Manufacturing time?
Typically for our regular design about 5-7days ,normally regular product need to have want 7-ten times .and also based mostly on order deposit squence to set up produce 1 by one particular.
four.Device motor is 380V,50HZ,3phase,can be modify it?
Of course,certain,Beneath 3phases,we change adjust 415V,500V,600V,220V,230V,50HZ-60HZ.
5.Following sale Support?
On-line services,any issues you should ship e-mail with machine photograph and video,preserve certain send out answers inside of 8hours.
also can offer engineer fly to your factory to CZPT device work and maintenace
|
US $8,000-40,000 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | on Line Service |
|---|---|
| Warranty: | 1 Year |
| Type: | Drum Crusher |
| Object: | Efb |
| Drive: | Electric |
| Crushing Degree: | Fine Grinding Machine |
###
| Customization: |
Available
|
|---|
###
| Model | BX216 |
| FEED SIZE(MM) | 230*500 |
| QTY OF FLY KNIVES(PCS) | 2 |
| SPEED OF KNIVES RUNNING(R/M) | 590 |
| MAX DIAMETER FEEDER(MM) | 230 |
| WOOD CHIPS SIZE FINISHED(MM) | 30 |
| CAPACITY(T/H) | 7-8 |
| MAIN POWER(KW) | 55 |
| FEEDER POWER(KW) | 3-4 |
| OIL PUMP POWER(KW) | 1.5 |
| MACHINE SIZE(MM) | 1800*1900*1210 |
| WEIGHT(KG) | 4070 |
###
| Model | BX-216 | BX-218 | BX-2113 | BX-2113D | BX-2116 |
| Main motor kw | 55 | 110 | 220 | 250 | 710 |
| Knife Qty | 2 | 2 | 3 | 4 | 4*2 |
| Feeder opener mm | 540×260 | 680×300 | 700×400 | 700×510 | 1250×650 |
| Max. Feeding diameter mm | 230 | 260 | 350 | 450 | 600 |
| Chips size mm | 25-30mm | 25-30mm | 25-30mm | 25-30mm | 25-30mm |
| Capacity T/h | 6-8 | 8-15 | 25-30 | 35-40 | 80-90 |
| Overall size mm | 3100×2000 x1500 |
3500×2180 x1800 |
3680×2450 X2050 |
5100×2700 X2300 |
5120x3040x 2330 |
| Weight kg | 4680 | 9100 | 11800 | 14000 | 33000 |
| Feeding conveyor | 6000×550 | 6000×700 | 8000×720 | 8000×720 | 10000×1200 |
| Outlet conveyor | 10000×600 | 10000×800 | 10000×800 | 10000×800 | 10000×1200 |
|
US $8,000-40,000 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | on Line Service |
|---|---|
| Warranty: | 1 Year |
| Type: | Drum Crusher |
| Object: | Efb |
| Drive: | Electric |
| Crushing Degree: | Fine Grinding Machine |
###
| Customization: |
Available
|
|---|
###
| Model | BX216 |
| FEED SIZE(MM) | 230*500 |
| QTY OF FLY KNIVES(PCS) | 2 |
| SPEED OF KNIVES RUNNING(R/M) | 590 |
| MAX DIAMETER FEEDER(MM) | 230 |
| WOOD CHIPS SIZE FINISHED(MM) | 30 |
| CAPACITY(T/H) | 7-8 |
| MAIN POWER(KW) | 55 |
| FEEDER POWER(KW) | 3-4 |
| OIL PUMP POWER(KW) | 1.5 |
| MACHINE SIZE(MM) | 1800*1900*1210 |
| WEIGHT(KG) | 4070 |
###
| Model | BX-216 | BX-218 | BX-2113 | BX-2113D | BX-2116 |
| Main motor kw | 55 | 110 | 220 | 250 | 710 |
| Knife Qty | 2 | 2 | 3 | 4 | 4*2 |
| Feeder opener mm | 540×260 | 680×300 | 700×400 | 700×510 | 1250×650 |
| Max. Feeding diameter mm | 230 | 260 | 350 | 450 | 600 |
| Chips size mm | 25-30mm | 25-30mm | 25-30mm | 25-30mm | 25-30mm |
| Capacity T/h | 6-8 | 8-15 | 25-30 | 35-40 | 80-90 |
| Overall size mm | 3100×2000 x1500 |
3500×2180 x1800 |
3680×2450 X2050 |
5100×2700 X2300 |
5120x3040x 2330 |
| Weight kg | 4680 | 9100 | 11800 | 14000 | 33000 |
| Feeding conveyor | 6000×550 | 6000×700 | 8000×720 | 8000×720 | 10000×1200 |
| Outlet conveyor | 10000×600 | 10000×800 | 10000×800 | 10000×800 | 10000×1200 |
Safety Precautions For a PTO Shaft
When you are working around PTOs, be sure to observe several safety precautions. These include removing the shield, keeping a safe distance from the machine, and avoiding entanglement. Entanglement is a serious injury that can even lead to death. Workers who are near the machine should always maintain a safe distance, especially if the speed of the machine is fast enough to entangle clothing. The speed of the PTO is usually 540 to 1,000 revolutions per minute, and the speed is enough to cause injury in a split second.
Safety precautions
One of the most important safety precautions for a PTO shaft is to make sure that it is properly guarded at all times. An unguarded PTO shaft can entanglement a worker, cause an injury, or even cause death. Operator awareness is key in preventing this hazard. Among other things, workers should not make repairs while the PTO is in use or wear loose or frayed clothing when working near the PTO. Likewise, they should read and follow instructions provided with their tractor and implement. Finally, they should use PTO shafts only for their intended purpose.
Another important safety precaution is to wear a protective gear such as a helmet and gloves before operating a PTO shaft. This type of equipment can be extremely dangerous because of its speed. A PTO shaft that is rotating at 540 rpm can travel two metres in less than a second. Damaged shielding is a common cause of entanglement, so it is important to check your machinery for damage before operating it.
When operating a tractor, PTOs should be kept clear of loose clothing. Loose clothing can easily catch on a rotating PTO shaft. Long hair or jewelry can also become entangled in a PTO shaft. It is also important to remember to secure the PTO shaft guard when the tractor is not in use. Also, never engage a PTO when the engine is off.
Types of pto shafts
PTO shafts are used in tractors and other equipment to secure the secondary gear in the tractor. They are available in different styles and sizes. These shafts are designed to withstand pressure, impacts, and tension. They may also include a shear pin and slip clutch. Before buying a new PTO shaft, make sure to check its measurements.
There are two types of PTO shafts available in an Agric rototiller. The first one has a slip clutch and the other has a shear pin safety device. In order to identify the type of PTO shaft used in a particular tractor, it is important to understand what it is used for.
There are two types of PTO shafts: the external and internal. The latter is used for larger machines, such as a lawnmower. The former is suitable for agricultural applications and is the preferred type for large tractors. The former is suitable for plowing, mowing, and shredding.
Transmission PTO shafts are the oldest type of PTO. They are connected to the tractor’s transmission. When a tractor is in gear, it stops the PTO shaft. However, when it’s not, it’s ineffective and can pose serious problems, such as when mowing. This type of PTO can also cause an overrun clutch to prevent the PTO shaft from working properly.
Reaction time
It’s important to know your reaction time when working around a power take-off (PTO) shaft. This part of the machine rotates at approximately 540 revolutions per minute and can pull in seven feet per second. Reaction time can be affected by age, physical condition, medications, lack of sleep, and stress. If you’re working around a PTO, be sure to remove any loose jewelry or other items that might interfere with your reaction time.
PTO accidents can be caused by several factors. The operator, the machine, and the environment all play a role. The operator’s physical and mental condition can also contribute to unsafe actions. For example, young operators may lack the knowledge and experience to recognize hazards. Older workers may also have slower reaction times, which can make it difficult to react quickly to slippery work areas.
Reaction time is measured as the time between a stimulus and the response. It does not include the time required to move the hand. Reaction time is a critical factor in sports, where athletes need to be quick to respond to the moves of their opponents. A good reaction time is necessary to score points.
A demonstration of the speed of a PTO shaft is a great tool to demonstrate how dangerous this part of a machine can be. To demonstrate the speed, use a 7-foot sash cord tied to a sliding collar universal joint. Select a 540-rpm PTO shaft, and a three-inch diameter shield. In one second, the rotating shaft makes nine revolutions and travels 7.1 feet. However, a cordless drill does not rotate at full speed and will take at least two seconds to wrap around the string.
Standardization
The standardization of PTO shafts in tractors is a major project. The EU Machinery Directive requires the protection of operators from rotating parts, such as the PTO. This is especially important when parts are accessible, as clothing can easily be wrapped around them, resulting in an accident. To prevent such accidents, manufacturers have begun to install non-rotating guards over the PTO drive shaft. These guards comply with the current EU good practice.
The European Standard EN 12965:2003+A2:2009 specifies the safety requirements for PTO drive shafts and their guards. It also specifies safe working practices for these components. The standard was approved by CEN on 16 September 2019. It is important to follow these regulations to ensure safe operation.
In the 1980s, a movement began among agricultural engineers to standardize the PTO shaft. The movement began because the different types of PTO shafts had not been interchangeable. A common example is the Deutz-Fendt shaft, which had become a standard for tractors.
As the power for PTO drives comes from the gearbox, the counter shaft acts as the PTO outlet. Standardization of PTO speeds makes it easier for manufacturers to design equipment to meet a specified speed. For example, a thresher is expected to run at a specific peripheral velocity of the threshing cylinder, which is a function of standard PTO speeds. This also allows designers to plan pulley arrangements with the standard PTO speed in mind.
Safety chains
The PTO shaft is an integral part of a tractor or implement, so it’s essential to secure it with safety chains. These chains are welded to both ends of the shaft and serve as backup connections between the tractor and trailer coupling point. There are several types of chains available, from domestic to metric, to meet your specific needs.
Because of the high speeds of PTO shafts, it’s crucial to protect these parts from being tangled. A single fall of a PTO shaft can cause serious injury or even death. In such an unfortunate situation, safety chains can prevent such injuries. PTO shafts are also extremely dangerous because the components can become hot while they are operating.
In addition to safety chains, operators must also be aware of the hazards that can occur when working near a PTO shaft. Unsafe behaviors, such as performing repairs while operating a machine, or wearing frayed clothing can lead to serious injury or death. In addition, all users should follow the instructions on the tractor or implement they’re using. It’s also essential to use a PTO shaft for its intended purpose.
In addition to safety chains, farmers should also ensure that the PTO drive shaft is securely attached to the tractor or implement. A broken or damaged PTO guard can be just as dangerous as an unprotected shaft. In addition, a poorly fitting PTO guard may provide a false sense of security. For this reason, it’s important to use protective clothing when operating a tractor or implement powered by a PTO.
Shield
The CZPT-Co universal fit PTO shaft shield is a simple and easy to use shield that has a patented lever release. The shield comes in two sizes, the smaller diameter shield is for shafts with a diameter of 1 5/16″ to 2 1/8″ and the larger diameter shield fits shafts of 2″ to 3 1/8″. Each shield is pre-installed with an assortment of bearings. The shield’s length is measured from the end of the yoke bearing groove to the other end.
If you’ve ever tried to work on a PTO shaft, you know that it can be frustrating. A PTO shaft shield is a safety device that covers the shaft and prevents it from rotating. These shields are also designed to be easy to connect and remove. The CZPT safety clip makes it easy to connect or disconnect the shield, and locks into place to prevent it from rotating with the inner driveshaft. The CZPT material used in RPM Transmissions driveline safety shields is strong and rigid.
Another improvement of this PTO shaft shield is the bracket that supports the two-piece PTO shaft and outer shield. The bracket is shown in FIG. 2 as an angled front view. FIG. 7 is a side elevation view of the bracket mounted to the machine tongue.
editor by czh 2023-01-04
China Tractor Spare Parts Universal Joint Pto Shaft (04B-LF-1400)) pto shaft adapter tractor supply
Item Description
Technical specs
1. Use for farm tillers and mower
two. Assembling with kinds cultivators and tractors
3. With CE certification
4. With some stock
Agriculture Cardan plastic guard tractor PTO shaft
1)Content: Spring steel, 65Mn, 60Si2Mn &lparSup6), 28SiMnB
2)Process: Forged
3)Warmth therapy: Normalized-hardened and tempered
four)Hardness: 40 – 50HRC
5)Functioning several hours: 200-250 hrs.
Requirements:
| Code | Description |
| 13001 | PTO cardan: 04B-LF-800 |
| 13002 | PTO cardan:05B-LF-800 |
| 13003 | PTO cardan: 04B-LF-1000 |
| 13004 | PTO cardan: 04B-LF-1400 |
| 13005 | PTO cardan: 571B-800 |
| 13006 | PTO cardan: 035B-800 |
| 13007 | PTO cardan: 04B-1000 |
| 13008 | PTO cardan: 04B-RLP-800 |
| 42001 | Shaft B7001 |
| 42002 | shaft KB with equipment,L:393mm, D13,22,seventeen,26 |
| 42003 | shaft Yanma, L236mm |
| 42004 | shaft B5000&sol5001 |
| 42005 | shaft PTO B5000 |
| 42006 | shaft PTO B1400 |
| 42007 | shaft PTO B6000 |
| 42008 | shaft with equipment TX 1300 |
| 42009 | shaft B-D-V B5000 |
Firm Introduction
HangZhou CZPT Sector & Trade Co., Ltd., is a professional producer and exporter of whole set of farm equipment and backyard garden equipment for 11 many years, primarily including mowers, tillers, plows and Japanese tractor components, and so forth.
We sincerely welcome customers abroad to check out us to examine cooperation and find widespread improvement. We believe our firm is your most dependable spouse and friend&excl
Trade Phrases
one. Trade phrases: FOB, CIF, EXW
2. Sample Coverage: You can test the high quality of our sample to begin with just before you obtain them in mass amount.
three. MOQ: 1 set
4. Payment Way: T&solT, L&solC, Western Union, D&solP.
five. Shipping Day: 10-30 days right after deposit paid. It is dependent on your get quantity.
6. Delivery Way: By Sea or By Air.
7. Following Service: 14 months assure of the major areas, we will send the ensure components together with the machine in your next purchase or we can ship them by air specific if you need to have them urgently.
Best Soon after-Sale Service
We have France Branch. CZPT Europe can give Europe buyer greatest services.
1. CZPT Europe can push the auto to mend the equipment once you give the contacting.
2. CZPT Europe can send the spare components to the buyers in time.
3. Our device Warranty time: 14 months. We give free spare areas.
4. We supply lifetime fix provider and spare areas. You just inform us what you want. We will give you the resolution in time.
five. If the CZPT Europe can’t give you the satisfaction. The head workplace engineer is inclined to use the CZPT blue Uniform outfits to your internet site for fix.
| Name: | Pto Drive Shaft |
|---|---|
| Automatic: | Semi-Automatic |
| Service: | OEM ODM Available |
| Usage: | for Tractors |
| Model1: | Pto Cardan: 04b-Lf-800 |
| Model2: | Pto Cardan:05b-Lf-800 |
###
| Customization: |
Available
|
|---|
###
| Code | Description |
| 13001 | PTO cardan: 04B-LF-800 |
| 13002 | PTO cardan:05B-LF-800 |
| 13003 | PTO cardan: 04B-LF-1000 |
| 13004 | PTO cardan: 04B-LF-1400 |
| 13005 | PTO cardan: 025B-800 |
| 13006 | PTO cardan: 035B-800 |
| 13007 | PTO cardan: 04B-1000 |
| 13008 | PTO cardan: 04B-RLP-800 |
| 42001 | Shaft B7001 |
| 42002 | shaft KB with gear,L:393mm, D13,22,17,26 |
| 42003 | shaft Yanma, L236mm |
| 42004 | shaft B5000/5001 |
| 42005 | shaft PTO B5000 |
| 42006 | shaft PTO B1400 |
| 42007 | shaft PTO B6000 |
| 42008 | shaft with gear TX 1300 |
| 42009 | shaft B-D-V B5000 |
| Name: | Pto Drive Shaft |
|---|---|
| Automatic: | Semi-Automatic |
| Service: | OEM ODM Available |
| Usage: | for Tractors |
| Model1: | Pto Cardan: 04b-Lf-800 |
| Model2: | Pto Cardan:05b-Lf-800 |
###
| Customization: |
Available
|
|---|
###
| Code | Description |
| 13001 | PTO cardan: 04B-LF-800 |
| 13002 | PTO cardan:05B-LF-800 |
| 13003 | PTO cardan: 04B-LF-1000 |
| 13004 | PTO cardan: 04B-LF-1400 |
| 13005 | PTO cardan: 025B-800 |
| 13006 | PTO cardan: 035B-800 |
| 13007 | PTO cardan: 04B-1000 |
| 13008 | PTO cardan: 04B-RLP-800 |
| 42001 | Shaft B7001 |
| 42002 | shaft KB with gear,L:393mm, D13,22,17,26 |
| 42003 | shaft Yanma, L236mm |
| 42004 | shaft B5000/5001 |
| 42005 | shaft PTO B5000 |
| 42006 | shaft PTO B1400 |
| 42007 | shaft PTO B6000 |
| 42008 | shaft with gear TX 1300 |
| 42009 | shaft B-D-V B5000 |
with high quality
editor by czh 2022-11-29
China SWC-180c-420 Pto Drive Shaft Continuous Casting Machinery Shaft Durable pto shaft adapter tractor supply
Merchandise Description
| Product Name | Cardan Shaft |
| Product Model | SWC-I75A-335+40 |
| Main Substance | 35CrMo or forty five# Metal |
| Nominal Torque | five hundred N.M |
| Normal Length | 335 mm |
| Length Compensation | 40 mm |
|
US $8 / Piece | |
1 Piece (Min. Order) |
###
| Standard Or Nonstandard: | Nonstandard |
|---|---|
| Shaft Hole: | 19-32 |
| Torque: | >80N.M |
| Bore Diameter: | 19mm |
| Speed: | 4000r/M |
| Structure: | Flexible |
###
| Samples: |
US$ 10/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Product Name | Cardan Shaft |
| Product Model | SWC-I75A-335+40 |
| Main Material | 35CrMo or 45# Steel |
| Nominal Torque | 500 N.M |
| Normal Length | 335 mm |
| Length Compensation | 40 mm |
|
US $8 / Piece | |
1 Piece (Min. Order) |
###
| Standard Or Nonstandard: | Nonstandard |
|---|---|
| Shaft Hole: | 19-32 |
| Torque: | >80N.M |
| Bore Diameter: | 19mm |
| Speed: | 4000r/M |
| Structure: | Flexible |
###
| Samples: |
US$ 10/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Product Name | Cardan Shaft |
| Product Model | SWC-I75A-335+40 |
| Main Material | 35CrMo or 45# Steel |
| Nominal Torque | 500 N.M |
| Normal Length | 335 mm |
| Length Compensation | 40 mm |
a line drive shaft
editor by czh 2022-11-25
Best near me shop made in China – replacement parts – PTO shaft manufacturer & factory Gear 1000 rpm pto shaft adapter Coupling for Taper Shaft with ce certificate top quality low price
We – EPG Team the most significant agricultural gearbox and pto factory in China with 5 different branches. For a lot more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
cv pto shaft for sale Our volvo 240 driveshaft business chevy truck push shafts is 2 piece travel shaft chevy truck positioned chelsea pto generate shaft in tractor pto shaft diameter XiHu travel shaft naza citra HangZhou mustang aluminum driveshaft Zhejiang pto shaft button Province. pto adapter shaft T Major merchandise incorporate: manure spreading truck, potato planting/harvesting equipment, disc plough, disc harrow, grass Mower/slasher, corn and wheat thershers, seeder, mouldboard plow, deep subsoiler equipment, rotary tiller, rear blade, fertilizer spreader, blend rice harvester, corn thresher, farm trailer, ridger, trencher, stubble cleaner, earth auger, cultivator and its add-ons: Plow disc blades, harrowing movie, plough idea and share, cultivator tine, casting components and so on. Gear coupling 15002 for taper shaft
For adapting the equipment pump and the PTO multiplier gearbox for tractor
Best made in China – replacement parts – agricultural gearbox manufacturer in China Agricultural john deere 1508 rotary cutter gearbox Mataram Indonesia Pto Shaft for Machinery Cardan Tractor Part Agriculture Rotavator 540 90 Degree Gearbox Drive Wide Angle for Weasler Adapter Pto Shaft with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive
We In 2000, EPG took the direct in gaining ISO14001 atmosphere administration certificate and thereafter handed the inspection of cleanse creation and recycling economy, profitable the title of “ZHangZhoug Green Company”.- EPG Group the greatest agricultural gearbox and pto factory in China with 5 diverse branches. For much more specifics: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
Pto Shaft Large Stock Propeller ODM OEM Cross Common Joint Mini Auto Travel Standard Flexible Welted Standard Industrial Gear shaft elements
The electrical power get-off (PTO) is a refined system, permitting implements to draw vitality from the motor and transmit it to
yet another software. It operates as a mechanical gearbox which can be mounted on the vehicle’s transmission.
The electrical power consider-off shaft (PTO 1000 to 540 pto reducer gearbox Kansas Metropolis United States shaft) is a critical element, created and produced for ongoing heavy-duty use. A great PTO
shaft should be sturdy adequate to bear the torsion and shear stress and minimize vibration.
Setforge, the forging subsidiary of Ever-Electricity Team, manufactures chilly extruded PTO shafts for all kinds of agriculture autos.
Our PTO shafts provide wonderful dependability and toughness in the course of everyday use.
EP Group has been internationally acknowledged as a trustworthy world-wide provider. Our point out-of-the-art producing method and
experienced engineers ensure the prime-quality of all Farinia components.
The use of first gear manufacturer’s (OEM) portion numbers or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our organization and the listed substitute areas contained herein are not sponsored, approved, or created by the OEM.
Best manufacturer made in China – replacement parts – PTO shaft manufacturer & factory 160HP large 1000 to small 1000 pto adapter 4WD New Factory Supply Farm Agriculturer Tractors with Rops Cabin with ce certificate top quality low price
We – EPG Team the largest agricultural gearbox and pto manufacturing facility in China with 5 diverse branches. For far more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
2005 ford f150 push shaft “EPG” bondioli & pavesi pto shaft brand pto shaft guard components rotocultivator pto shaft lock pin substitution ploughshares kubota entrance pto shaft in maruti 800 generate shaft cost T.S. pto mounted hydraulic pump total john deere pto stub shaft strains 2002 dodge ram 1500 push shaft yoke made king kutter tiller pto shaft parts in our manufacturing unit have been analyzed and appraised by the Ministry of Agriculture and have obtained the license of popularizing farm equipment promulgated by the Ministry of Agriculture of the People’s Republic of China. Our products are marketing effectively in Chinese markets and some goods bought in global markets are well received by Chinese and overseas customers at home and overseas.
160HP 4 wheel drive/New/Factory Provide/Farm/Agriculturer Tractors With ROPS/Cabin
1.YTO/Yuchai Engine
2.Travel Wheel:4 wheel drive(4*4)
3.Four-stroke engines with large torque reserve.
4.Adju EPT entrance and rear tracks.
5.Entire hydraulic steering.
Technological Parameters
| Model No. | TL1604 | |
| Sort | four*4 | |
| Engine | Design | LR6M3Z-23( EPT Motor) |
| Rated electricity(kw) | 118 | |
| RPM | 2300 | |
| General dimension (L*W*H) | 5286*2320*2965/3145 | |
| Tread(mm) | Entrance | 1760(1650,1778,1862,1888,1972,1990,2100) |
| Rear | 1750~1860(1650~1760,1854~1964,1954~2064,2054~2164,2158~2268,2258~2368) | |
| Wheelbase | 2834 | |
| Clutch Sort | One blade,dry,one purpose, puppy-engagement, Air assist hydrostatic pedal pushed | |
| Gear Box | Straight and helical enamel equipment transmission, composed, Synchronizer and meshing gear shift, aspect procedure. | |
| Equipment shift | 32F+24R(Shuttle gift) | |
| Bodyweight (kg) | 6200 | |
| Tyre | Entrance | 14.9-28 |
| Rear | 18.4-38 | |
| PTO(RPM) | Rear seperated, 540/a thousand rpm | |
| PTO Shaft Spline (mm) | 8D-38×32×6 | |
| Other folks | Push cabin,AC, 3-way valve, hydaulic steering, independent power lifter, Creep shift | |
Tractor Functions
one.Fuel consumption get to upto 1 liter/hour diesel.
two. Differential lock stop rear whee EPT skidding when climbing, operating in paddy land and wet weather conditions.
3.Equip with double pace of PTO shaft 540/760 rpm. Tailored to diverse subject sort.
four.Adopt full hydraulic steering, impartial gasoline tank, straightforward functioning and substantial mobility.
5.Adju EPT entrance and rear tracks meet up with agricultural requirements of different places. Additional-big water tank and high capacity upkeep-free of charge battery make the equipment with ideal warmth-dispersion and starting functionality.
6.Can adopt to a variety of implements,this sort of as plough,disc plough,ratory tiller,disc harrow,etc
Service
Pre-sales support
one, 24 hrs on the internet .Your inquiry will be rapid reply by e mail .
2,Professionally and patiently introduction,detai EPT photographs and working video clip to demonstrate device .
3,Visting our manufacturing facility.
Support on product sales
one,Check every equipment and examine the equipment critically .
two,Ship the machine image which you get , then packing it with stHangZhourd export package after you validate the device is ok .
three,Shipping:If ship by sea .right after shipping and delivery to seaport .Will notify you the shipping time and arrival time . Finally, deliver all original documents to you by Categorical. We will tell you the monitoring variety following we put up the files.
After-sales services
1, 24 several hours on the web to fix any problem . Supply you English guide e-book and technical assist , maintain and install video clip to assist you remedy the problem, or dispatch employee to your factory.
2 Instruction how to install the machine, training how to use, maintain and mend the machine.
FAQ
1. What is the voltage/stage for this device ?
220V 50Hz/solitary section ,380V 50Hz/three stage .We also could produce in accordance to customer’s requirement.
2. What is your phrases of payment?
T/T 30% as deposit, and &70% prior to supply. We will demonstrate you the pictures of the goods and offers ahead of you pay out the stability.
3. What your conditions of supply?
EXW,FOB,CFR,CIF,DAF.
4. How about your shipping time?
Normally, it will take about 13 days after receipt of deposit payment. The particular delivery time relies upon on the objects and the quantity of your get.
five. What is actually your MOQ?
one set
six. How ought to I do if fulfill some difficulties even though using?
We can provide English guide e-book and also get a video for exhibiting how to take care of the problems or dispatch our employee to your factory.