Product Description
LX Type Elastic Pin Coupling (GB/T5014-2003)
LX Elastic pin coupling is made of several non-metallic elastic pins and 2 half couplings. The coupling is connected by lacing these elastic pins into holes of 2 half couplings, and thus the torque is transferred.
LX Elastic pin coupling can compensate the relative offset of 2 axes to a certain extent. Elastic parts are sheared during operation and are generally applicable to the working conditions of medium speed transmission shafts with low requirements. Allowable working temperature environment temperature is -20ºC~+70ºC, the nominal transfer torque is 250~180000N.m.
♦LX Elastic Pin Coupling Basic Parameter And Main Dimension(GB/T5014-2003)
| Type | Nominal torque N·m |
Speed rpm |
Shaft hole(mm) d1,d2,dz |
Length of shaft hole(mm) | D | B | Limited compensation | Rotary inertia Kg·m2 |
Mass Kg |
||||
| Y type | J,J1,Z type | Axial | Radial | Angle | |||||||||
| L | L1 | L | mm | ||||||||||
| LX1 | 250 | 8500 | 12,14 | 32 | 27 | 32 | 90 | 2.5 | +0.5 | 0.15 | ≤0°30´ |
0.0064 | 2 |
| 16,18,19 | 42 | 30 | 42 | ||||||||||
| 20,22,24 | 52 | 38 | 52 | ||||||||||
| LX2 | 560 | 6300 | 20,22,24 | 52 | 38 | 52 | 120 | 2.5 | +1 | 0.15 | ≤0°30´ | 0.253 | 5 |
| 25,28 | 62 | 44 | 62 | ||||||||||
| 30,32,35 | 82 | 60 | 82 | ||||||||||
| LX3 | 1250 | 4750 | 30,32,35,38 | 82 | 60 | 82 | 160 | 2.5 | +1 | 0.15 | ≤0°30´ | 0.6 | 8 |
| 40,42,45,48 | 112 | 84 | 112 | ||||||||||
| LX4 | 2500 | 3870 | 40,45,45,48,50, 55,56 |
112 | 84 | 112 | 195 | 3 | +1.5 | 0.15 | ≤0°30´ | 3.4 | 22 |
| 60,63 | 142 | 107 | 142 | ||||||||||
| LX5 | 3150 | 3450 | 50,55,56 | 142 | 107 | 142 | 220 | 3 | +1.5 | 0.15 | ≤0°30´ | 5.4 | 30 |
| 60,63,65,70,71, 75 |
142 | 107 | 142 | ||||||||||
| LX6 | 6300 | 2720 | 60,63,65,70,71, 75,80 |
142 | 107 | 142 | 280 | 4 | +2 | 0.20 | ≤0°30´ | 15.6 | 53 |
| 85 | 172 | 132 | 172 | ||||||||||
| LX7 | 11200 | 2360 | 70,71,75 | 142 | 107 | 142 | 320 | 4 | +2 | 0.20 | ≤0°30´ | 41.1 | 98 |
| 80,85,90,95 | 172 | 132 | 172 | ||||||||||
| 100,110 | 212 | 167 | 212 | ||||||||||
| LX8 | 16000 | 2120 | 80,85,90,95 | 212 | 167 | 212 | 360 | 5 | +2 | 0.20 | ≤0°30´ | 56.6 | 119 |
| 100,110,120,125 | 212 | 167 | 212 | ||||||||||
| LX9 | 22400 | 1850 | 100,110,120,125 | 212 | 167 | 212 | 410 | 5 | +2 | 0.20 | ≤0°30´ | 133.3 | 197 |
| 130,140 | 252 | 202 | 252 | ||||||||||
| LX10 | 35500 | 1600 | 110,120,125 | 212 | 167 | 212 | 480 | 6 | +2.5 | 0.25 | ≤0°30´ | 273.2 | 322 |
| 130,140,150 | 252 | 202 | 252 | ||||||||||
| 160,170,180 | 302 | 202 | 252 | ||||||||||
| LX11 | 50000 | 1400 | 130,140,150 | 252 | 202 | 252 | 540 | 6 | +2.5 | 0.25 | ≤0°30´ | 555.7 | 520 |
| 160,170,180 | 302 | 242 | 302 | ||||||||||
| 190,200,220 | 352 | 282 | 352 | ||||||||||
| LX12 | 80000 | 1220 | 160,170,180 | 302 | 242 | 302 | 630 | 7 | +2.5 | 0.25 | ≤0°30´ | 902 | 714 |
| 190,200,220 | 352 | 282 | 352 | ||||||||||
| 240,250,260 | 410 | 330 | – | ||||||||||
| LX13 | 125000 | 1080 | 190,200,220 | 352 | 282 | 352 | 710 | 8 | +3 | 0.25 | ≤0°30´ | 1700 | 1057 |
| 240,250,260 | 410 | 330 | – | ||||||||||
| 280,300 | 470 | 380 | – | ||||||||||
| LX14 | 180000 | 950 | 240,250,260 | 410 | 330 | – | 800 | 8 | +3 | 0.25 | ≤0°30´ | 4318 | 1956 |
| 280,300,320 | 470 | 380 | – | ||||||||||
| 340 | 550 | 450 | – | ||||||||||
NOTE:Coupling weights and rotary inertia in the sheet are calculated according to the minimum diameter of the shaft hole and the combination of J/Y shaft hole.
♦Product Show
♦Other Products List
| Transmission Machinery Parts Name |
Model |
| Universal Coupling | WS,WSD,WSP |
| Cardan Shaft | SWC,SWP,SWZ |
| Tooth Coupling | CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK |
| Disc Coupling | JMI,JMIJ,JMII,JMIIJ |
| High Flexible Coupling | LM |
| Chain Coupling | GL |
| Jaw Coupling | LT |
| Grid Coupling | JS |
♦Our Company
HangZhou CZPT Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.
Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective.
♦Our Services
1.Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.
2.Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
3.Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.
4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.
5.Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.
♦FAQ
Q 1: Are you trading company or manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.
Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks of PDF or AI format.
Q 3:How long is your delivery time?
Generally it is 20-30 days if the goods are not in stock. It is according to quantity.
Q 4: Do you provide samples ? Is it free or extra ?
Yes, we could offer the sample but not for free.Actually we have a very good price principle, when you make the bulk order then cost of sample will be deducted.
Q 5: How long is your warranty?
A: Our Warranty is 12 month under normal circumstance.
Q 6: What is the MOQ?
A:Usually our MOQ is 1pcs.
Q 7: Do you have inspection procedures for coupling ?
A:100% self-inspection before packing.
Q 8: Can I have a visit to your factory before the order?
A: Sure,welcome to visit our factory.
Q 9: What’s your payment?
A:1) T/T.
♦Contact Us
Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China
| Standard Or Nonstandard: | Standard |
|---|---|
| Shaft Hole: | 19-32 |
| Torque: | 50-70N.M |
| Bore Diameter: | 14mm |
| Speed: | 9000r/M |
| Structure: | Flexible |
| Samples: |
US$ 500/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What Is a PTO Shaft?
There are a few different types of PTO shafts. For example, there are German, Italian, and North American types. Moreover, there are several series options, such as cap-to-cap overall length, bearing diameter, and snap rings. Each type comes with different features and benefits, so it is important to select the correct one for your needs.
Power Take-Off
The Power Take-Off (PTO) shaft is a mechanical coupling system that couples an aircraft’s accessory gear box with an engine. It transmits high rpm and peak torque. It is an indigenously developed product, which has been cleared for flight fitment and successfully completed an engine ground run test. It is now being used by two Indian manufacturers.
There are four main types of PTOs. Semi-permanently mounted power take-offs are common on marine engines and industrial engines. These power take-offs are used to power secondary implements and accessories. In airplanes, accessory drives are also common. Jet aircraft use four different types of PTO units:
PTO shafts are composed of two telescoping pieces that slide into one another. This allows the user to lower and lift the implement. They are also equipped with universal joints, also known as U-joints. These joints allow flexibility and durability. These joints are held together by two yokes at each end of the shaft.
The speed of the power take-off shaft varies according to tractor size. Larger tractors turn the shaft at 1,000 revolutions per minute, while smaller tractors turn it at 540 revolutions per minute. This means that a person trapped in the open PTO shaft could be whipped around nine times in one second, while a person caught in a smaller tractor could be whipped around 16 2/3 times in one minute. Ultimately, the weight of the person could even cause the engine to stall.
Applications
PTO shafts have a variety of uses in the farm equipment industry. They can be connected to a wide variety of work equipment. For instance, a PTO is commonly used to power a hydraulic pump on a tractor’s front end. In such a case, a small shaft with a U-jointed design will attach to a yoke coupler and turn the pump. While this is not as universal as a tractor PTO, it still falls under the category of a PTO.
A PTO system will have a female coupling on one end and a male coupling on the other end. This essentially acts as an extension adaptor. It will transmit torque signals from the shaft to a static cover assembly to determine the speed and torque in both directions. In some cases, a PTO system will be able to record the data directly onto a PC or other electronic device.
In addition to power take-off systems, these systems can also provide power for auxiliary equipment. In addition, a split shaft PTO allows the power of one engine to power the axle of another vehicle. Depending on the engine’s power, a PTO may use either an air or hydraulic pump to power auxiliary equipment.
The PTO shaft is also useful for securing a tractor or equipment. This device features safety shields on both ends and fits securely inside the secondary shaft. The PTO shaft can be found in a variety of shapes. There are domestic-shaped and metric-shaped versions.
Safety precautions
Operator awareness is key in preventing PTO shaft entanglement. It is important to avoid performing any repairs while the machine is operating. It is also important to avoid wearing loose or frayed clothing that could become entangled in the rotating shaft. It is also essential to read and follow the tractor’s operating manual. Also, ensure that the PTO shaft is only used for its intended purpose.
A power take-off, or PTO, is a type of attachment that transmits mechanical power from a tractor to another piece of farm machinery. Common examples include hay balers, rotary cutters, weed mowers, and forage blowers. These attachments are often equipped with protective shields to prevent entanglement. The shaft should always be covered when in use.
Operators should also avoid getting too close to the PTO shaft. The operator may become entangled if they accidentally approach the spinning shaft. They should also avoid wearing loose clothing because loose clothing can easily get caught in the stub and cause serious injury. These safety precautions are essential for safe operation of all farm machinery.
When using a PTO with heavy drive, it is important to use a heavy-duty model with a PTO shaft that is appropriate for the application. Alternatively, use a universal joint or wide-angle universal joint. These attachments can be a safer alternative to traditional PTOs. Draw-bar pins on trailed machines should be firmly secured to avoid damaging the PTO shaft. It is also recommended to guard all drive shafts on the machine.
Design
A PTO shaft has several advantages. It is a versatile power transmission that is ideal for heavy-duty equipment. Its design is rigid, yet flexible, allowing for high-speed operation. This is due in part to the splines, which prevent the parts from separating during operation.
The gears of a PTO drive are made from high-quality steel, which increases their durability. They are made from SCM 440 gear material. This material has a high tensile strength and a high yield point. It also has a high Young’s modulus of 206,000 N/mm2. Its Poisson’s ratio is 0.3, while its pressure angle is twenty degrees. In addition, its addendum and dedendum coefficients are both greater than 1.0.
Designed for use on industrial and marine engines, PTOs allow the driver to transfer power from a primary mover to a PTO-powered attachment. They are easy to install and offer improved service life and decreased downtime. In aircraft applications, PTOs are also common. Jet aircraft and agricultural equipment often use PTOs.
The PTO shaft’s dimensions are crucial for preventing vibration. It should extend at least 14 inches from the hitch point to the input shaft of the implement. In some cases, a shorter shaft may not fit the tractor, so it is important to choose the right size. If the PTO shaft is too short, it could cause the two parts to separate when the tractor is turning a corner.
Cost
A PTO shaft is a very important part of a tractor because it transfers power to an attached attachment. These attachments typically include rotary tillers, brush cutters, hush hug, and mowers. While many attachments use a PTO shaft, the connection flange is not standardized. Some older models of tractors may have a connection flange that is closer to the tractor.
A PTO shaft will work with either a standard or a Weasler yoke. You can also choose from metric and North American models. There are also Italian PTO shafts. To ensure the best performance and durability, it is essential to ensure that the shaft is free of damage. To avoid such damage, a PTO shaft should be purchased from a reputable supplier.
PTO shafts are made from high-quality steel and feature a 1-3/8″ 6-spline at both the tractor and the implement end. In addition, splined PTO shafts are easy to replace and provide excellent horsepower. These PTO shafts can also increase a tractor’s work efficiency.
The cost of a PTO shaft replacement can vary. The average price range for a front-wheel-drive half-shaft is $470 to $940, and the cost for a rear-wheel-drive drive half-shaft replacement is about $1,600 to $2,000. The parts cost about two hundred dollars and the labor could take an hour or more.
Buying guide
If you’re looking to replace a PTO shaft on a lawn tractor, it’s important to consider several factors. First, the PTO shaft needs to be compatible with the tractor you plan to use it on. Then, you need to determine which size universal joint you need. To do this, you can use a PTO shaft size chart.
The PTO shaft is the component that transfers power from the tractor to the attached implement. It’s made up of several parts, including the internal and external PTO yoke, the universal joint, and the safety chain and shield. There are several types of PTO shafts available. You’ll want to choose the right size for your machine, as well as the number of PTO shafts you need.
A PTO shaft is essential for a tractor because without it, the tractor cannot drive. Understanding the PTO parts will help you operate farm machinery more effectively. For instance, if you’re buying a new Power Take Off shaft, you’ll want to look for one that’s compatible with the model and year of the tractor.
You’ll also need to consider the length of the PTO shaft. A PTO shaft can vary from 53 inches when compressed to 77 inches when fully extended. The most common length for a PTO shaft is about fifty-three inches, but you can also choose a longer one if you need more flexibility.
editor by CX 2023-06-02
Best Custom made in China – replacement parts – PTO shaft manufacturer & factory Good 1969 camaro driveshaft Quality Gear Coupling with Elastic Pins with ce certificate top quality low price
We – EPG Group the most significant agricultural gearbox and pto factory in China with 5 various branches. For a lot more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
push shaft inspira The kubota pto shaft part number organization 2001 dodge ram 1500 entrance travel shaft was chevy s10 push shaft qualified 2000 chevy silverado travel shaft by last push shaft ISO9001:2008 pto shaft with slip clutch uk Quality jeep cherokee xj front generate shaft Management pto shaft adapters Method. 1 piece driveshaft It is our intention to offer a vast selection of high quality products at reasonably priced rates, give the very best service for customers happy and contribute to our continued advancement.
LZ Elastic Pin Equipment Coupling(GB/T5015-2003)
LZ High High quality Elastic Pin Equipment Coupling employs nylon rod to change the column pin into the opposite gap among the two 50 % coupling and the outer ring internal surface area, and transfers the torque via the column pin to recognize the link among two half couplings. It has specific shaft offset payment ability and shock absorption overall performance. LZ Substantial High quality Elastic Pin Equipment Coupling is symmetrical and interchangeable, prolonged life, permitting massive axial movement, and has the efficiency of cushioning, damping, use resistance and so on. The shaft holes of the two axle head of the pin variety coupling of the LZ elastic column are all straight holes.
♦LZ Elastic Pin Gear Coupling Fundamental Parameter And Main Diamention(GB/T5015-2003)
| Model | Nominal Torque Tn Kn·m |
Speed (n) r/min |
Shaft gap diameter d |
Shaft hole duration | D | D1 | B | S | Rotary inertia kg·mtwo |
Mass kg |
| Y kind J1sort | ||||||||||
| L | ||||||||||
| LZ1 | .112 | 5000 | twelve-24 | 27-fifty two | seventy six | 40 | forty two | 2.5 | .001 | 1.67 |
| LZ2 | .twenty five | 5000 | 16-32 | forty four-82 | ninety | fifty | 50 | two.5 | .003 | 3.00 |
| LZ3 | .sixty three | 4500 | twenty five-forty two | 44-112 | 118 | sixty five | 70 | 3. | .12 | 7.31 |
| LZ4 | 1.8 | 4200 | 40-sixty | eighty four-142 | 158 | 90 | ninety | 4 | .045 | 16.20 |
| LZ5 | 4.5 | 4000 | 50-eighty | eighty four-172 | 192 | 120 | ninety | 4 | .108 | 27.02 |
| LZ6 | eight | 3300 | sixty-95 | 107-172 | 230 | one hundred thirty | 112 | five | .242 | 40.fifty nine |
| LZ7 | 11.2 | 2900 | 70-a hundred and ten | 107-212 | 260 | a hundred and sixty | 112 | 5 | .443 | fifty nine.60 |
| LZ8 | 18 | 2500 | 80-a hundred thirty | 132-252 | three hundred | a hundred ninety | 128 | six | .908 | ninety four.67 |
| LZ9 | 25 | 2300 | ninety-a hundred and fifty | 132-252 | 335 | 220 | 150 | 7 | 1.733 | 13.eight |
| LZ10 | 31.5 | 2100 | a hundred-170 | 167-302 | 355 | 245 | 152 | 8 | two.422 | 169.3 |
| LZ11 | forty | 2000 | a hundred and ten-180 | 167-302 | 380 | 260 | 172 | eight | three.369 | 203.one |
| LZ12 | sixty three | 1700 | one hundred thirty-two hundred | 202-352 | 445 | 290 | 182 | 8 | 6.524 | 296.6 |
| LZ13 | 100 | 1500 | 150-240 | 202-410 | 515 | 345 | 218 | eight | 14.19 | 469.two |
| LZ14 | a hundred twenty five | 1400 | 170-260 | 242-410 | 560 | 390 | 218 | eight | 21.67 | 621.7 |
| LZ15 | one hundred sixty | 1300 | 190-300 | 282-470 | 590 | 420 | 240 | 10 | 29.52 | 730.5 |
| LZ16 | 250 | a thousand | 220-340 | 282-550 | 695 | 490 | 265 | ten | 62.47 | 1144 |
| LZ17 | 355 | 950 | 240-380 | 330-550 | 770 | 550 | 285 | ten | 106. | 1557 |
| LZ18 | 450 | 850 | 250-420 | 330-650 | 860 | 605 | 300 | thirteen | one hundred seventy five.4 | 2062 |
| LZ19 | 630 | 750 | 280-450 | 380-650 | 970 | 695 | 322 | fourteen | 323.2 | 3068 |
| LZ20 | 1120 | 650 | 320-five hundred | 380-650 | 1160 | 800 | 355 | fifteen | 669.4 | 4715 |
| LZ21 | 1800 | 530 | 380-630 | 450-800 | 1440 | 1571 | 360 | eighteen | 1880 | 8699 |
| LZ22 | 2240 | 500 | 420-750 | 540-800 | 1520 | 1100 | 405 | 19 | 2596 | 9437 |
| LZ23 | 2800 | 460 | 480-850 | 540-880 | 1640 | 1240 | 440 | twenty | 3982 | 12095 |
♦Product Show
♦Other Items Record
| Transmission Machinery Components Title |
Product |
| Universal Coupling | WS,WSD,WSP |
| Cardan Shaft | SWC,SWP,SWZ |
| Tooth Coupling | CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK |
| Disc Coupling | JMI,JMIJ,JMII,JMIIJ |
| Higher Adaptable Coupling | LM |
| Chain Coupling | GL |
| Jaw Coupling | LT |
| Grid Coupling | JS |
♦Our Firm
Our business materials diverse sorts of goods. High good quality and affordable cost. We stick to the theory of “top quality very first, service very first, steady improvement and innovation to meet the customers” for the administration and “zero defect, zero issues” as the good quality goal. To EPT our service, we provide the items with great good quality at the sensible cost.
Welcome to customize merchandise from our manufacturing unit and you should provide your design drawings or make contact with us if you need other requirements.
♦Our Providers
1.Design and style Solutions
Our design staff has expertise in cardan shaft relating to merchandise style and growth. If you have any demands for your new item or desire to make more improvements, we are here to offer you our assist.
two.Solution Companies
uncooked materia EPT → Slicing → Forging →Rough machining →Shot blasting →Heat remedy →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
3.Samples Procedure
We could create the sample in accordance to your prerequisite and amend the sample constantly to fulfill your need to have.
4.Study & Development
We normally investigation the new needs of the industry and build the new product when there is new autos in the industry.
five.Good quality Management
Each and every phase need to be EPT take a look at by Specialist Personnel in accordance to the stHangZhourd of ISO9001 and TS16949.
♦FAQ
Q 1: Are you trading organization or company?
A: We are a professional maker specializing in manufacturing
various collection of couplings.
Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the buyers with tailored artworks of PDF or AI format.
Q 3:How long is your shipping time?
Typically it is twenty-30 days if the merchandise are not in stock. It is according to amount.
Q 4: Do you provide samples ? Is it cost-free or extra ?
Indeed, we could offer you the sample but not for free.In fact we have a very good price tag principle, when you make the bulk buy then cost of sample will be deducted.
Q 5: How long is your warranty?
A: Our Guarantee is twelve thirty day period beneath standard circumstance.
Q 6: What is the MOQ?
A:Normally our MOQ is 1pcs.
Q 7: Do you have inspection techniques for coupling ?
A:a hundred% self-inspection prior to packing.
Q 8: Can I have a pay a visit to to your factory before the buy?
A: Certain,welcome to check out our factory.
Q 9: What’s your payment?
A:1) T/T. 2) L/C
♦Speak to Us
Web:
Insert: No.1 HangZhou Street,Chengnan park,HangZhou City,ZheJiang Province,China
High factory made in China – replacement parts – in Grande Sao Luis Brazil Performance Elastic Pin Coupling with top quality
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 distinct branches. For more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Item Description
| Title | Coupling |
| Model | Xihu (We EPT Lake) Dis.g |
| Substance | Carbon metal, steel, aluminum alloy, ca EPT iron, brass, and so forth. |
| Hole | Round gap, D-formed gap, tapered hole, and so forth. |
| Producing Tools | CNC device , automated lathe machine,stamping device,CNC milling device,rolling device, lasering, tag grinding equipment and so forth. |
| Machining Approach | Equipment Hobbing, Gear Milling, Gear Shaping, Equipment Broaching,Gear Shaving, Equipment Grinding and Equipment Lapping |
| Screening Gear | Projecting apparatus, Salt Spray Check, Durometer, and Coating thickness tester, 2d projector |
| Specification | Standard or Customized made |
| Heat therapy | Large frequency quenching |
| Floor treatment | Oxidized, blackened, galvanized, zinc plated, and many others. |
| Application | Extensively used in automotive, textile, printing and packaging products, sewing tools, office equipment, laser engraving products, tobacco, monetary products, stage lights, interaction foodstuff equipment, health care equipment, steel machinery, petrochemical, instrumentation, different precision machine too EPT And EPT fields. |
The rewards of our coupling
Coupling refers to a system that connects two shafts or shafts and a rotating member, which rotates together throughout the transmission of movement and electricity, and does not disengage beneath standard conditions. It is also utilized as a security gadget to prevent the related parts from being subjected to too much loads and to safeguard once again EPT overload.
1. Transferability
two. Cushioning
three. Safe, dependable, with ample strength and support life.
4. Simple construction, straightforward to assemble, disassemble and sustain.
Merchandise sort
We can make customers’ satisfactory goods in accordance to the samples or drawings supplied by consumers. For the completion of a solution, we also require to know his materials, warmth treatment demands and surface area remedy specifications. We are a factory with 40 years of production knowledge, welcome to seek the advice of.
|
|
Our business focus in producing all sorts of interior and exterior equipment, large precision spline shaft and equipment shaft. We are hunting ahead to the cooperation with you, and we believe that we will be your perfect decision.
FAQ
1)Are you investing business or maker?
We are factory.
2)How can I customise my merchandise?
Attach your drawing with information(floor treatment,material,amount and specific needs and so forth.)
3)How prolonged can I get the quotation?
We will give you the quotation inside of 48 hours(taking into consideration the time difference)
4)How lengthy will you make the areas?
Typically it is 5-ten times if the items are in inventory. Or it is 15-twenty five days if the goods are not in inventory, it truly is in accordance to quantity.
5)Do you supply samples? Is it free of charge or further?
Sure, we could provide the sample, the samples and delivery charges need to be borne by the shopper.
six)What is your phrases of payment?
Payment≤1000 USD, 100% in advance. Payment≥1000 USD, 30% T/T in progress, equilibrium before shipment. If you have any inquiries, you should never hesitate to get in touch with us.
7)What if the goods we acquired are not excellent?
Speak to us without hesitation, our particular after-sales provider will consider the accountability
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 diverse branches. For more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of unique tools manufacturer’s (OEM) part figures or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating item use and compatibility. Our organization and the shown substitute parts contained herein are not sponsored, approved, or produced by the OEM.
