Product Description
The controllable propeller can be configured into various forms such as single-engine single-propeller, twin-engine double-propeller and twin-engine parallel car according to the type of shafting. The product has high reliability and structure through hydrodynamic calculation, structural design analysis, and material optimization. Simple and easy to maintain. In addition, the controllable propeller system can be configured with multiple types of PTO through the transmission device to drive 1 or more loads (shaft generators, etc.) to meet the supporting requirements of different ship types and functions.
The characteristics of the company’s controllable propeller products:
1. Tailor-made design: Since each ship search has a different line type, our engineers based on the latest hydrodynamic theory and calculation method of tank test results, design the most matching propeller for each ship according to the actual wake field , To ensure the best propeller efficiency while minimizing vibration and noise.
2. Serialization: Use finite element design tools to analyze and optimize the blade and hub mechanism. Three series of controllable propeller hubs have been developed and designed to meet different ship types, and the maximum diameter of the hub can reach 2 meters.
3. Low pressure stability: Through continuous optimization and improvement of the structure of the controllable pitch propeller, the controllable pitch propeller system produces a lower working oil pressure, which improves the stability and reliability of the blades when adjusting the pitch.
4. Convenient integration: The PLC-based controllable propeller control system has high flexibility and redundancy, and improves convenient visualization and system settings. Users can choose the joystick/DP system according to their needs.
5. The geometry of the blade section: Cooperate with Marin to optimize it, which can effectively reduce cavitation and improve propulsion efficiency.
6. OD box (oil distributor): installed at the front end of the gear box for easy installation, testing and maintenance.
7. Unique security design: In the event of a hydraulic failure, the pitch can be locked in the original position in both the reverse and CZPT positions.
8. Realize the integration of CPP and gearbox hydraulic system: save installation space and reduce installation cost.
Company Profile
HangZhou LionHeart Power Equipment Co., Ltd., a subsidiary of 1 of the nation’s top marine services company —- HangZhou Agricultural Machinery Co., Ltd., is a provider of marine equipment worldwide. Our company is committed to providing the best solution to our customer’s project since 1996. With over 20 years of profound experience in the marine services industry, our company has set up a professional and customer-friendly system in our every pre-sales, shipping and after-sales process to ensure your worry-free shopping experience. We ship our brand-new products all over the world, at the best prices on the Web.
LionHeart Power is a professional provider for equipment like marine engines, generators, gearboxes, propellers, marine interior fit-out, deck machinery and related marine spare parts. Our processes and procedures are designed to present the perfect product that will meet or exceed the expectations of every 1 of our customers. We back up that commitment with comprehensive services through the product’s whole life cycle, along with our key technologies and leading product expertise. That is the reason why we stand out as the nation’s marine equipment sales champion of multiple brands for over 10 consecutive years.
LionHeart Power carries 1 of the nation’s largest inventories of marine equipment and related parts from 20+ manufacturers such as Weichai, HangZhou Advance, Deutz, Steyr, Zichai, CZPT and more, among which the CZPT and ADVANCE series are fully covered. Specifically, that inventory is meticulously organized over 57 acres outside and 118, 000 sq. FT. Of warehouse under roof. That means our products are generally in stock for immediate availability. Besides, we are proud of our resource plHangZhou system of products, which is unparalleled in the industry, offering you the shortest lead time and efficient service.
LionHeart Power’s staff is expertly trained not only to quickly locate the products you’re looking for, but also to meet your project requirements with the best solution. If what you are looking for is not ‘on the shelf’, we will customize it for you. This strength builds CZPT our CZPT partnership with various manufacturers and production institutes. Efficiency and service are the goals of every member of our organization. LionHeart Power knows your time is valuable and we produce this value for you. Quality equipment and expertly-trained service technicians, combined with our extensive inventory, give you the edge in your commercial and industrial success.
Quality is our culture all the engines will be tested before leaving the factory We are proud to say that in our years of international trading experience. we never had a single order returned to us, For all our clients, you will receive exactly what you ordered, and you will receive it on time and we live by the principle that customer comes first
Certifications
Packaging & Shipping
FAQ
1.Processing
Orders are usually packed and ready to ship in 1 to 3 business days if the products are in stock. However shipments are subiect to required manufacturing time and customs clearance procedures. which can cause delays beyond original delivery estimates. For detailed delivery information, please contact customer service.
2.Packing Methods
Normally we use wooden boxes for packaging or we can pack it according to your special needs.
3.Shipping Methods
We are happy to offer a variety of shipping methods. Shipping methods available: EXW. FOB.CER. CIF.
4. International Returns & Exchanges
Unfortunately we can’t accept retums on intemational orders. We will test each product before dellverv One-year manufacturer warranty is quaranteed on our complete machines and 3 months on spare parts. I1 you have any concerns with your order, please reach out to customer service
5.Payment Methods
We sugqest 50/50 T/T payment method: 50 percent down payment on placement of the order, with the remaining 50% due CZPT shipment. We also accept L/C, Trade Assurance, Visa transfer and Paypal
| After-sales Service: | 24 Hours Online |
|---|---|
| Warranty: | One Year |
| Material: | Bronze, Copper, Aluminium, Steel, etc. |
| Blades: | 5 |
| Certification: | RoHS, ISO9001:2000, CE |
| Certificate: | CCS |
Power Take-Off (PTO) Shafts
Power take-off (PTO) shafts are used on many types of machines, including jet aircraft. They are typically semi-permanently mounted to a marine or industrial engine, and are powered by a drive shaft. The drive shaft also powers secondary implements and accessories. Depending on the application, accessory drives may also be used in aircraft. There are four main types of PTO units used in jet aircraft.
Power take-off (PTO) shaft
The power take-off (PTO) shaft of a tractor can be controlled to operate in one of two modes: automatic and manual. Automatic mode operates when the PTO shaft starts turning and is automatically engaged when the power lift is raised by actuating the lift lever 9. Manual mode operates when the lift lever is not raised.
The manual mode allows for manual adjustments. A retaining band 12 may be adjusted arcuately about PTO shaft S with an axial center parallel to the axis of the PTO shaft S. The retaining band may be secured by conventional over center clamps. The retaining band 12 may also be adjusted arcuately about pin or bolt 30.
Power take-off (PTO) shaft safety retainers are used to prevent unintended disconnection of the PTO shaft. The safety retainers comprise a stationary openable band that circumscribes the PTO shaft near the connection with driven machinery. The band is preferably offset from the axis of the PTO shaft.
While the PTO shaft is a convenient way to transfer mechanical power to farm implements, there are several inherent hazards associated with using it improperly. Accidental disconnections of the PTO shaft pose a significant risk for the operator. A disconnect can cause the PTO shaft to whip around the driven machinery, potentially causing injury.
Power take-off shaft entanglements can be devastating to the limbs trapped in them, requiring amputation in some cases. In addition to being dangerous, the PTO shafts must be fully guarded to prevent contact with the ground. A farmer must never get too close to an operating PTO shaft to protect their own safety.
Types
There are several different types of PTO shafts available to suit various applications. They can vary in size and number of splines. Each standard has a specific speed range and is designed to fit a variety of implements. For example, there are German and Italian types of PTO shafts.
The type of PTO shaft you choose will determine the maximum load that can be safely transferred. Depending on the type, the rate at which the PTO clutch engages will be different. For example, a lower-density PTO shaft will engage at a slower rate than a higher-density PTO shaft, while a higher-density shaft will be more tolerant of higher loads.
The primary function of a PTO shaft is to secure equipment to the tractor or other agricultural equipment. These parts often feature safety shields on both ends. They are also made in the same shape as the secondary shaft. The front shaft is wider than the secondary shaft, which allows the secondary shaft to fit inside. However, during movement, pieces of the PTO shaft can collapse, making them less safe.
PTO shafts are expensive and easy to steal, so make sure to protect your investment. Make sure the PTO shaft has guards to protect it from thieves. There are two types of PTO shafts: the external and the internal PTO yokes. Internal PTO shafts have an internal PTO yoke, while external PTO shafts use a universal joint. There is also a safety chain and shield on the external PTO shaft.
Depending on the application, you can choose between several different kinds of PTO shafts. Some types of PTO shafts have multiple splines, which can increase the torque transmitted. For applications requiring accuracy and precision, you may want to use a parallel keyed shaft.
Connections
A PTO shaft has two parts: an input and an output. The input portion of a PTO adapter shaft has a smaller diameter, and the output portion has a larger diameter. Both are connected by splines. These splines have tapered outer ends. The first bore 25 has a first frustoconical wall, while the second bore has a second frustoconical wall.
One of the most common causes of PTO shaft failure is a poorly adjusted clutch. Another common cause is improper lubrication of the PTO shaft’s wide angle joints. PTO shafts should be lubricated at least once every eight hours. If you fail to do this, you risk premature ware and reduced life expectancy.
When a PTO shaft is installed in a tractor, the tractor must be connected to the implement using a coupler frame. The coupler frame has a PTO adapter mounting flange that engages with the PTO stub shaft. The coupler frame can move to accommodate the PTO adapter shaft, and the PTO adapter shaft can pivot and slide with the coupler frame.
When a PTO shaft fails, it can result in damage to the tractor and implement. Identifying the cause will help you fix the problem. Constant compression of the PTO shaft can damage the connecting shafts and connections. This could damage the tractor or implement, resulting in expensive repairs. When this happens, it is important to cut or shorten the shaft to reduce the risk of damage.
PTO shaft 24 extends rearward from tractor 10 and is connected to the front universal joint 28 and first end of variable-length splined drive shaft 32. The shaft is connected to a drive mechanism 36 on a mobile work implement 34. This drive mechanism may be mechanical, hydraulic, or a combination of both.
Safety
It is very important for every person using a tractor to understand the safety of PTO shafts. PTOs can be extremely dangerous, and without the correct shielding, they can cause serious injury. It can also be very dangerous if someone accidentally steps on or falls on one while the machine is operating. This is why it is important for everyone using a tractor to read the manufacturer’s manual and follow the safety guidelines for PTO shafts. Moreover, PTOs must only be used for the purpose intended.
PTO safety should be the number one priority for every operator. A small child was tragically killed when he became entangled with a spinning PTO shaft. His father tried to pull him out of the shaft, but was unable to do so. His clothing, which was near the spinning shaft, caught on the PTO and dragged him into it. His body was thrown around the shaft several times, and he sustained injuries to his leg, right arm, and head.
The PTO shaft is an important part of a tractor, and is used to secure the equipment. It is usually secured by safety shields on both ends. There are several kinds of safety shields. One type is a shield that is attached to the front of the PTO shaft. Another type is a shield that rotates freely on its bearings.
Power takeoffs are common on most small and compact tractors, construction machinery, and other equipment. They rotate to provide the drive for the equipment. However, the PTO shaft is very dangerous because it can easily catch something that gets too close to it. Moreover, loose items can also get tangled around the PTO shaft.
Maintenance
One of the most important things to do in order to keep your PTO shaft in top condition is to keep it properly greased. This can be done by using a grease gun or a hand pump. It is important to keep the grease fresh and apply it in the appropriate amounts depending on how much you use the PTO. It is also important to separate the primary and secondary shafts and remove any debris from them.
It is also important to check the spline threads on your PTO on a periodic basis. This is important because some signs of dry shafts are not always immediately apparent. Similarly, spline threading and corrosion can occur behind the scenes and go undetected. Proper PTO maintenance is a vital part of safe and efficient operation.
A damaged or worn drive shaft will prevent your car from turning freely, leaving you exposed to higher repair bills. In addition, it will drastically affect the performance of your car. A broken drive shaft can even result in a crash. You should take your vehicle to a mechanic as soon as you notice any of these problems.
Fortunately, most PTO-driven equipment is equipped with a shear pin to prevent collisions and prevent damage to the gearbox and shaft. It should also be replaced regularly to prevent excessive wear. Long bolts pose a risk of entanglement and can easily catch clothing or gloves. For safety reasons, it is important to disengage the PTO when not in use.
Another thing to do is to keep the PTO shields clean. They must be regularly rotated and tested. Always ensure that your drawbar is properly configured for your machine. This prevents stressing or separating the driveline.
editor by CX 2023-05-16