We – EPG Group the largest gearbox & motors , couplings and gears manufacturing unit in China with 5 distinct branches. For more details: Cell/whatsapp/telegram/Kakao us at: 0086~13 571 88828 13858117778 571 88828
Product Characteristics
1.Precision step angle 1.8 ° / Phase
two.Can be custom-made in accordance to consumer needs .9 °, 3 °, 3.6 °, .045 °,.15 °, .eighteen ° stage angle
3.Phase angle precision ± .09 ° (no load action)
four.Resistance precision ± 10% in accordance to consumer requirements agreed scaled-down tolerance variety
five.Inductance Accuracy ± 20%
six.Allowable temperature increase <80 ºC (rated current, two-phase power) can be customized according to customer requirements more low temperature or higher temperature
7.Ambient temperature -20 ºC ~ +50 ºC (no freezing)
eight.Safety class IP43 IP54 or IP65 can be personalized in accordance to client requirements
nine.Medium Atmosphere No corrosive fuel or dust. Not directly in contact with drinking water, oil and other liquid specifications can be customized higher
10.Environmental humidity below eighty five% under 40 ºC 57% under underneath 50 ºC (no condensation)
11.Insulation Class B (+ 130 ºC)
12.Insulation endure voltage 100MΩ Min. DC 500V
thirteen.Insulation resistance DC 500V Measured with a megger much more than 100Ω
14.Radial runout .02 Max. (450 gf)
15.Axial Clearance .08 Max. (450gf)
sixteen.Axial displacement of .075mm.Max 10N load in the shaft stop
seventeen.Radial displacement of .571mm.Max in the axial application of 5N load
| Design | Voltage | Resistance /phase | Existing/stage | Inductance /phase | Keeping Torque |
| (V) | (Ω) | (A) | (mH) | (Kg-cm) | |
| 42STH33-0956 | four | four.two | .95 | four | one.58 |
| 42STH33-0606 | six | ten | .six | 11 | 1.58 |
| 42STH33- 571 | 12 | 38.5 | .31 | 33 | one.fifty eight |
| 42STH33-1334 | two.eight | two.1 | one.33 | four.two | two.2 |
ABOUT US
Ritscher team was set up in 2006.we always concentrate on micro-motors for house electrical equipment and market equipment because setting up.at present we have two expert micro-motor factories in China which severally found in HangZhou town and HangZhou city.it has an area of 25,000 sq. meters crops and more than three hundred workers, annual output is 3 million pcs and has 5 million pcs yearly generating capacity.after many several years development,we had built a excellent status in the market and got more and far more customers’ trust in the entire world.
We started from shaded pole motors at beginning, up to now,our item included of shaded pole motors,synchronous motors,stepping motors ,capacitor motors, BLDC motors, DC motors and compressors. Our merchandise are widely used for producing refrigerators, freezers, micro-wave ovens, air heaters, air exhausters, ventilators,ovens, air filter, massage equipment and a lot of other equipments.
As a realiable top quality warranty,Ritscher has full R&D departement,QC section,generating department,acquire division and so on. has perfect generating tools like Aluminum diecasting, Zinc diecasting, Sheet metal stamping, Plastic injection molding and so on. also check/ detection system like multiplex temp measuring gadget, functionality parameter inspection gadget, Phenol peptide answer pinhole tester,Anechoic place and many others.
Endeavoring to supply the greatest product and services to clients,we always do the most energy to become an exceptional producer of micro motors.
Ritscher is always willing to establish honest business partnership with close friends from all above the entire world.
Welcome speak to with us!
Consider ritscher ,enjoy modern daily life!
Our firm FAQ for you
(1) Q: What variety motors you can give?
A:For now,we mostly give Kitchen Hood Motor,DC Motor,Gear Motor,Fan Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor etc.
(2) Q: Is it achievable to pay a visit to your manufacturing facility
A: Positive. But you should kindly preserve us posted a few times in advance. We want to check our
schedule to see if we are offered then.
(3) Q: Can I get some samples
A: It depends. If only a few samples for private use or substitution, I am scared it will
be challenging for us to provide, because all of our motors are custom made created and no inventory
accessible if there is no even more wants. If just sample tests before the formal purchase and
our MOQ, price and other conditions are satisfactory, we might enjoy to offer samples.
(4) Q: Is there a MOQ for your motors?
A: Indeed. The MOQ is in between a thousand~ten,000pcs for different models after sample approval.
But it really is also okay for us to acknowledge smaller sized plenty like a number of dozens, hundreds or countless numbers
For the original 3 orders after sample acceptance.For samples, there is no MOQ requirement. But the significantly less the better (like no a lot more than 5pcs) on situation that the quantity is adequate in situation any adjustments required right after initial tests.
The use of first equipment manufacturer’s (OEM) component numbers or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our organization and the shown replacement parts contained herein are not sponsored, accredited, or made by the OEM.
